Selecting Ddc Information; Transparent Transmission Of Ddc Information; Preset Ddc Profiles - G&D DVISplitter2-DL Installation Manual

Selecting DDC information

Selecting DDC information
The video signal can only be displayed at the monitors of the DVISplitter2-DL if
video signal and DDC information are transmitted.

Transparent transmission of DDC information

In the default settings (switch position
interface to read out the DDC information of the connected monitor.
The interface is used to transmit the read-out DDC information to the
DVI-D DL CPU
video source.
If the DDC information cannot be transmitted over the entire distance, for example
due to a weak signal, the monitor displays no image or you cannot adjust the pre-
ferred resolution.
In this case, you can enable one of the preset DDC profiles or store the monitor's
DDC information in the DVISplitter2-DL.

Preset DDC profiles

You can choose a certain DDC profile if the monitor does not display an image or if
you cannot adjust a certain resolution.
ADVICE:
You can also use the
information. If you enable the
mation to the video source.
The following table lists the different switch positions and the respective DDC pro-
files or functions:
5 · G&D DVISplitter2-DL
), the DVISplitter2-DL uses the
Def.
Learn mode to read out and save the monitor's DDC
User mode, the DVISplitter2-DL transmits the infor-
DVI-D DL Out 1