Do you have a question about the PM85 and is the answer not in the manual?
Questions and answers
Mike onuffer
January 20, 2025
Part number 51 shaft hugger control moves freely. My auger won’t spin no tension on that shaft.
1 comments:
Mr. Anderson
February 4, 2025
If the auger on the McCulloch PM85 does not spin when the auger control lever is engaged, and the part number 51 shaft hugger control moves freely, it is likely due to sheared capscrews (shear bolts). These capscrews are designed to break when a foreign object or ice becomes lodged in the impeller, preventing damage to other components. To resolve this issue, check if the capscrews have sheared and replace them with original equipment capscrews/shear bolts as specified in the manual.
Page 1
WMV-Dresden, Ersatzteilservice für Elektrowerkzeuge, Motor- und Gartengeräte REPAIR PARTS MANUAL MODEL NUMBER PM85 (MFG. ID. NO. 96191001003) Snow Thrower 532 41 20-14 12.20.06 BY Printed in U.S.A.
Warranty may last, so the above limitations or exclusions may not apply to you. This Warranty gives you specifi c legal rights, and you may have other rights which vary from locale to locale. This is a limited Warranty within the meaning of that term as defi ned in the Magnuson-Moss Act of 1975. www.mcculloch.biz...
Need help?
Do you have a question about the PM85 and is the answer not in the manual?
Questions and answers
Part number 51 shaft hugger control moves freely. My auger won’t spin no tension on that shaft.
If the auger on the McCulloch PM85 does not spin when the auger control lever is engaged, and the part number 51 shaft hugger control moves freely, it is likely due to sheared capscrews (shear bolts). These capscrews are designed to break when a foreign object or ice becomes lodged in the impeller, preventing damage to other components. To resolve this issue, check if the capscrews have sheared and replace them with original equipment capscrews/shear bolts as specified in the manual.
This answer is automatically generated