Troubleshooting - Panasonic LUMIX DC-GX850K Owner's Manual

Others

Troubleshooting

First, try out the following procedures.
If the problem is not resolved, it may be improved by selecting [Reset] on
the [Setup] menu.
• Please also refer to the "Owner's Manual for advanced features (PDF format)", which
describes more detailed information.
The camera cannot be operated even when it is turned on.
The camera turns off immediately after it is turned on.
• The battery is exhausted.
> Charge the battery. (P12)
The charging lamp blinks.
• This phenomenon occurs when charging in a location where the temperature is very
high or very low.
> Reconnect the USB connection cable (supplied) in a location where the ambient
temperature (and the temperature of battery) is in a 10 oC to 30 oC (50 oF to 86 oF)
range, and try charging again.
• If your PC is not capable of supplying sufficient power, charging is not possible.
The battery becomes flat too quickly.
• When [ ] ([4K Pre-Burst]) is selected, the battery drains faster.
> Select [
] ([4K Pre-Burst]) only when recording.
This unit suddenly turns off during recording.
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or continuous 4K photo or
motion picture recording. Wait until the camera cools down.
> Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
> If you continue recording even when [
be displayed and the camera will turn off automatically.
72
DVQX1111 (ENG)
] is flashing on the screen, a message will