Download Print this page

Hamax HAM604809 User Manual

Caress w/carrier adapter
Hide thumbs Also See for HAM604809:

Advertisement

Quick Links

Hamax ID: HAM604809
US User manual Caress w/carrier adapter
Hamax AS
Visiting address:
Vålerveien 159
N-1599 Moss
Norway
Tel.: +47 69 23 38 38
email: customerservice@hamax.no
www.hamax.com
User
Manual
Caress w/carrier adapter
Approved according to
ASTM F1625-00(2012)
EN
User Manual
Congratulations on purchasing the Hamax bicycle child seat. You now have
a comfortable and safe child seat when used as intended that can be
adjusted to fit your child as she/he grows.
Please read the User Manual carefully before assembling or using the child seat.
WARNING! Failure to comply with the manufacturer's instructions
can lead to serious injury or death of the passenger/rider!
Keep the User Manual in a safe place and review periodically and if you
buy extra equipment for your child seat.
EN
CAUTION!
FR
MISE EN GARDE!
ES
¡CUIDADO!
1 8 0 m
1 2 0 –
Ø = 10 – 20 mm
WARNING:
• The additional safety strap needs to be
Improper installation, use or maintenance of
secured to the bicycle frame or seat post
the bicycle child seat can result in serious
• For optimal comfort and safety of the child,
injury or death to the child or rider. To reduce
ensure that the seat does not slope forwards,
these risks read and follow the important
so that the child does not tend to slide out of it.
warnings and instructions below.
Hamax recommend that the backrest should
slope backwards slightly.
• ALWAYS use the safety belt/restraint
• Check all parts of the bike that they function
system and ensure the child is snugly
correctly with the bicycle seat mounted.
restrained in the seat.
• Make sure any exposed rear saddle springs
• ALWAYS Ensure the rider and child wear
are covered
approved and properly fitted bicycle helmets.
USE
• NEVER leave a child unattended in the carrier.
• NEVER leave a child in the carrier with the
• To take a child on a bicycle, the rider must
bicycle supported only by the kick stand.
normally be over 16 years. Check your
• DO NOT use the carrier if any part is broken or
national laws and regulations.
missing.
• The child seat is approved for children from
• DO NOT modify the carrier. This may create a
about 9 months to 6 years or maximum 22 kg
dangerous condition and will invalidate the
weight. Ensure that you re-check from time to
warranty.
time that the child's weight and size do not
• DO NOT attach extra luggage or equipment
exceed the maximum capacity of the seat.
to the carrier, as they may exceed the load
• Do not carry a child that is too young to sit
limit and lessen stability. The maximum
safely in the seat. The child must be able to sit
capacity of the carrier is 22 kg (48.5 lb).
unaided for a longer period of time, at least as
• IMPORTANT: The load of a child carrier will
long as the intended bicycle journey. Please
lessen the bicycle's stability and alter
observe the recommended minimum age.
handling characteristics, particularly steering
If you are uncertain, please consult a
and braking.
pediatrician.
• Presence of a child carrier on a bicycle may
• Ensure that it is not possible for any part of
require alteration of the method used by the
the child's body or clothing to come into
rider to mount or dismount the bicycle. Take
contact with any moving part of the seat or
care when getting on or off bicycle.
cycle and to re-check as the child grows, due
• Before each ride, ensure the mounted carrier
to the danger of entrapment of feet in the
does not interfere with braking, pedaling or
wheel and of the finders in brake mechanisms
steering of the bicycle.
and sprung saddles. The child seat gives good
• NEVER ride the bicycle in inclement or
side and feet protection. However, you are
hazardous conditions.
recommended to buy and fit a closed wheel
• NEVER ride the bicycle at night without
guard/chain guard. You can buy this at your
adequate lighting.
bicycle dealer.
• Reflectors meeting CPSC regulations must
• Check there are no sharp objects, such as split
be visible whether the carrier is on the
wires, on the bicycle that can harm the child.
bicycle or not.
• Ensure that the restraint system is not loose
• BE CERTAIN any exposed saddle springs are
or able to become trapped in any moving
covered.
parts particularly the wheels, including when
• BE CERTAIN foot protectors are attached.
the cycle is ridden without a child in the seat.
• Always use the safety belt/restraint system,
INSTALLATION
ensuring the child is restrained in the seat.
• Can be mounted on bicycles with a luggage
• A child sitting in a child seat should be dressed
carrier which meets the EN 14872 standard
more warmly than the rider.
(25 Kg or more).
• The child should be protected against rain
• Can be mounted on bicycles with a luggage
with suitable waterproof garments.
carrier with a width between 120 and 180 mm.
• The rider and the child should both be wearing
• Can be mounted on bicycles with a luggage
approved and properly fit helmets.
carrier with a tube diameter between 10 and
• Remember that the child seat can get very hot
20 mm.
standing out in the sunshine, so check the
• Cannot be mounted on bicycles with a
child seat before placing your child in it.
luggage carrier that is does not have straight
• When transporting the bicycle by car (outside
and parallel sides
the car) remove the seat. Air turbulence might
m
• Cannot be mounted on bicycles with a
damage the seat or loosen its fastenings to
luggage carrier with a tube diameter of less
the cycle, which could result in an accident.
than 10 mm
MAINTENANCE
• Cannot be mounted on bicycles with a
luggage carrier with a tube diameter of more
• When cleaning the seat, use only lukewarm
than 20 mm
soapy water.
• The seat should only be mounted on a bicycle
• If the child seat is involved in an accident or
which is suitable for this kind of load. Please
are damaged, contact your dealer to check
ask your bicycle supplier for detailed advice.
that it can still be used. Damaged parts must
• The child seat is fitted on the luggage carrier
always be replaced. Contact your dealer if
of the bike with the carrier adapter. See
you are not sure how to fit the new parts.
picture E. The carrier adapter knob must be
We wish you and your child many enjoyable
tightened hard enough to fix the seat securely
and prevent it from sliding. Make it a rule to
bicycle trips with your Hamax child seat!
check this before starting a trip with the bike.
• Make sure the carrier adapter is well
tightened and check this at regular intervals

Advertisement

loading
Need help?

Need help?

Do you have a question about the HAM604809 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hamax HAM604809

  • Page 1 • For optimal comfort and safety of the child, injury or death to the child or rider. To reduce ensure that the seat does not slope forwards, Congratulations on purchasing the Hamax bicycle child seat. You now have Manual these risks read and follow the important so that the child does not tend to slide out of it.
  • Page 2 WARRANTY a) Fastening knob Asiento principal b) Lock Sistema de retención The Hamax Bicycle Child carrier is warranted from Conditions that may cause premature wear of the Respaldo regulable c) Locking pin the date of purchase. The warranty period carrier may not be covered by the warranty.
  • Page 3 User Manual Caress w/carrier adapter...
  • Page 4 Release keys, separate the seat & adapter CARESS W/CARRIER ADAPTER Turn the seat w/carrier adapter upside-down, slide out the locking pin (6c) to release the keys (6d). Now the carrier adapter (6) can be removed by flipping it up, and then unhinging it at the end (pic.
  • Page 5 Pic. 2 Pic. 3...
  • Page 6 Unlock the carrier adapter with the supplied keys CARESS W/CARRIER ADAPTER The key (6d) needs to be inserted in the lock (6b) and turned 360 degrees counterclockwise before removing it. La clé (6d) doit être insérée dans Debe introducir la llave (6d) en el la serrure (6b) et tournée sur 360 cierre (6b) y girarla 360°...
  • Page 7 Unlocked Locked...
  • Page 8 Unscrew the carrier adapter CARESS W/CARRIER ADAPTER Screw the claws outward by turning the knob (6a) counterclockwise untill the claws fit around the luggage carrier. The knob needs to be pushed in while turning. Dévissez les crampons en tournant Abra las mordazas girando el la molette (6a) dans le sens inverse des mando (6a) en sentido contrario al de aiguilles d’une montre, jusqu’à...
  • Page 10 Connect the seat & adapter CARESS W/CARRIER ADAPTER Lay the seat (1) with the front side down. Hold the carrier adapter (6) in the same position as pic. 1, and hinge it on like in pic. 2. Pic. 1 Posez le siège (1) face vers le bas. Coloque el asiento (1) con la parte Tenez l’adaptateur de porte-bagage (6) delantera boca abajo.
  • Page 11 Pic. 2...
  • Page 12 Slide in the locking pin CARESS W/CARRIER ADAPTER Slide in the locking pin (6c) in its track, make sure the end is pointing upwards for it to fit correctly. When fastened the locking pin should not be able to move. Insérez la goupille de verrouillage Introduzca el pasador de cierre (6c) dans le guide en vous assurant...
  • Page 13 Place the seat on the luggage carrier CARESS W/CARRIER ADAPTER Position the seat (1) as much towards the front as possible while still leaving room for reclining the seat. Make sure the centre of gravity mark (9) is less than 10 cm behind the rear hub.
  • Page 14 Fasten the seat on the luggage carrier CARESS W/CARRIER ADAPTER Fix the seat to the luggage carrier by pushing in and turning the knob (6a) clockwise until the claws grasp the side tubes of the luggage carrier. Tighten hard enough to fix the seat securely and prevent it from sliding.
  • Page 15 Lock the carrier adapter CARESS W/CARRIER ADAPTER Push in the lock pin (6b) on the end of the knob (6a). The knob is now locked and can be unlocked with the supplied keys (6d). Appuyez sur la goupille de Presione el pasador de cierre (6b) verrouillage (6b) sur l’extrémité...
  • Page 16 Fasten the additional security strap CARESS W/CARRIER ADAPTER The additional security strap needs to be secured to the frame or seat post. Lead the security strap (6e) through the holes as shown in pic. 1 & 2, then pull at the end to tighten it.
  • Page 17 Pic. 2...
  • Page 18: Foot Rest Adjustment

    Foot rest adjustment CARESS W/CARRIER ADAPTER How to release the foot rest (5): Release the footrest handle on the back by flipping it upwards. Move the foot rest (5) to the preferred height and fasten the foot rest by pressing the foot rest handle down. Pour libérer le support de pieds Cómo soltar el reposapiés (5): (5) : Libérez le levier du repose-pieds à...
  • Page 19: Foot Strap Adjustment

    Foot strap adjustment CARESS W/CARRIER ADAPTER How to fasten/release the foot strap (a): To fasten the foot strap put the strap into the track and pull down to preferred length. The strap will automatically lock. It’s only possible to tighten the strap when it is in the track. To loosen the foot strap, just pull it out of the track.
  • Page 20 Extra footguard CARESS W/CARRIER ADAPTER To mount the extra footguard (8): Press the footguard into the fitting grooves until it clicks. zoom Pour monter la protection de pieds Para montar la protección supplémentaire (8) : Poussez la adicional para los pies (8): Presione la protection de pied dans les rainures protección para los pies para acoplarla d’ajustement jusqu’à...
  • Page 21 CLICK! Opposite view...
  • Page 22: Restraint System

    Restraint system CARESS W/CARRIER ADAPTER The restraint system (2) can be attached and detached by pressing in or out the buckle (4) shown in pic. 1. It is important to press at the middle of the buckle button (pic. 2 & 3) when detaching the restraint system.
  • Page 23 Chest buckle adjustment CARESS W/CARRIER ADAPTER The restraint system length can be adjusted by adjusting buckle a and b. To adjust buckles (a+b) hold the buckle as shown in pic. 1. By pressing the red button, the belt loosens by pulling the buckle upwards.
  • Page 24 Sliding backrest CARESS W/CARRIER ADAPTER The sliding backrest (3) height can be adjusted, so the backrest and restraint system is in the correct height to the child’s shoulders. Move backrest to preferred height, and fasten by pressing the lever down (pic. 1). Pic.
  • Page 25 Reclinable function CARESS W/CARRIER ADAPTER To recline the seat twist the reclining knob (7) to the position required. Pour incliner le siège en arrière, Para reclinar el asiento, gire el tournez la molette de réglage (7) botón (7) hasta alcanzar la posición jusqu’à...
  • Page 26 Before embarking on a bicycle trip CARESS W/CARRIER ADAPTER • Adjust the restraint system (2) to ensure the child is snugly restrained in the seat. • Check if the carrier adapter (6) still is secured well and does not slide •...
  • Page 28 How to remove the Carrier Adapter CARESS W/CARRIER ADAPTER The carrier adapter for luggage carrier mounting can be taken off the Caress seat and can be replaced by a carrier bow. To do this you need to take the seat of the carrier adapter. Unlock the lock (6b)(pic.
  • Page 29 Pic. 2...
  • Page 30 How to remove the Carrier Adapter CARESS W/CARRIER ADAPTER Turn the seat (1) upside down. Press both snap fingers on the locking pin (6c) and slide it out (pic. 1). Now the carrier adapter (6) can be removed by flipping it up, and then unhinging it at the end (pic.
  • Page 31 Pic. 2 Pic. 3...
  • Page 32 After adjustment, lock the seat by turning the eccentric shaft locking pin to locked position. For detailed instructions and illustrations to each step, please see our website: www.hamax.com Montez la barre porteuse sur le Acople la barra sustentadora al siège :...