Olympus VN-541PC User Manual page 32

Troubleshooting
Problem
Noise during
playback.
Unable to erase
a file.
6
Noise when
monitoring a
recording.
Unable to write
index marks/temp
marks .
Playback speed is
fast (or slow).
Memory error.
Format error.
EN
32
Alarm
Possible cause
message
Objects brushed against the
-
voice recorder while recording.
The voice recorder was
placed near a mobile phone
-
or fluorescent light during
recording or playback.
LOCK The file is locked.
LOCK
The file is a read-only file.
- Feedback is being caused.
The maximum number of marks
FULL
(99) has been reached.
LOCK
The file is locked.
LOCK
The file is a read-only file.
Playback speed function is set to
-
anything other than [x1.0].
An internal memory error
ERROR
occurred.
ERROR
A formatting problem occurred.
Solution
Try your best not to touch the
voice recorder during recording.
Redo the operation with the
voice recorder in a different
location.
You must unlock the file before
you can erase it (☞ P.22).
Unlock the file, or undo the read-
only setting on a PC.
Connecting a speaker with a
built-in amplifier may cause
feedback during recording.
Using the earphones to monitor
recording is recommended.
Adjust the recording setup such
as by moving the earphones and
microphone farther apart, or
ensuring the microphone is not
facing the earphones.
Erase unnecessary marks
(☞ P.23).
Unlock the file (☞ P.22).
Unlock the file, or undo the read-
only setting on a PC.
Set the playback speed function
setting to [x1.0] (☞ P.19).
Contact the Olympus Customer
Support Center (☞ back cover).
Format the memory again
(☞ P.26).