Package Contents • LogN HN UN2 • CD • Quick Installation Guide Minimum System Requirements • Wireless Access Point • PC or Laptop with USB Port Operating System Requirements • Windows • Windows 2000 • Windows Vista • Windows...
Installation Note: Do not insert LogN HN-UN2 in the beginning before Software Installation is completed. Software Installation of “LogN Wireless LAN Utility” 1- Exit all Windows programs. Insert the included “Installation CD” into the computer.The CD will run automatically. 2- From the main menu prompted, select “Driver/Utility Installation” .
Page 4
4- Follow-up with installation screens until you reach the following screen. Once reached, click “Finish” to restart PC to complete softwareinstallation.
2- Once MS-Windows tells that the device is installed successfully, you are finished with LogN installation process. Running LogN Wireless Adapter Mode LogN HN-UN2 connects your PC wirelessly to a home access point 1- Launch “LogN Wireless LAN Utility” just installed.
Page 6
• Double click “LogN Wireless LAN Utility” icon on desktop. • OR, go to Start>All Programs>LogN HN-UN2>LogN Wireless LAN Utility 2- In the menu bar, make sure that the “Mode” menu selects “Station” mode.
Page 7
3- Go to “Available Network” tab, the system will automatically scan access points nearby, or click “Refresh” button to rescan again.
Page 8
4- Double click your preferred home access point or click “Add to profile” button to make connection. 5- “LogN Wireless LAN Utility” will pop a window with the acquired access point information.If the access point wireless is secured, you will need to type the access point wireless security key.
Page 9
6- Once finished,“LogN Wireless LAN Utility” will lead you to the “General” tab to show you connection status.
Page 10
Access Point Mode LogN HN-UN2 will act as an Access Point that takes internet from your PC internet.This Access Point will be seen by other PCs 1- Launch “LogN Wireless LAN Utility” • Double click “LogN Wireless LAN Utility” icon on desktop.
Page 11
2- In the menu bar, switch mode from “Station” to “Access Point” , it will take little time to convert to the new mode. In the “General” tab, you will see SSID which is the wireless name LogN HN-UN2 will appear with.The default...
Page 12
3- To change the wireless name or to set wireless security press “Config” .
Page 13
PC. Select the one that will be the internet source for the LogN HN-UN2 access point. In following screen, the Ethernet cable connection to the PC is the source of Internet 5- Using other PCs, search for LogN HN-UN2 wireless name (MyPCname_AP) and connect to it.