IMPORTANT SAFETY SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death. The symbol is used in the service documentation to indicate that specific component shall be replaced only by the component specified in that documentation for safety reasons.
·the digital effect processing / digital delay · Ventilation Do not block areas of ventilation opening. Failure to do could result in fire. Always (1) PA system own digital effect processing / digital delay install accordance with the manufacturer's instructions. (2) Use up/ down arrow direction button to choose the effect you need ·...
Page 4
·Connect the power supply 1. The main characteristic: (1) After finishing the above installation you can turn on the power supply 1) Stereo output 75W/4Ω×2(RMS) (2) make sure the mixer power supply is in closed state before you turn on the 2) 1/4"...
4. Accessory: 6. Installation introduction CH.3 9 meters speaker link cables 2 PCS Speaker stands 2 PCS ·Speaker cabinet installation introduction Dynamic Microphone 1 PCS (1) Take out the speaker cabinet and then connect them LINE IN 6 meters microphone link cables 1 PCS (2) Take out the speaker stands, adjust to the needed height, and make sure Fuse Φ5x20mm T 3AL...
Need help?
Do you have a question about the COMBO-150 and is the answer not in the manual?
Questions and answers