To Safely Remove A Usb Device; Read Before Connecting Usb Storage Devices; Searching For A Track Quickly; Using The My List Function - Samsung MX-JS8000 User Manual

To safely remove a USB device

Press the 5 button twice while the USB is
1.
playing or press the 5 button once when
play has stopped.
2. When the "REMOVE" message appears on
the display, remove the USB device.
Read Before Connecting USB Storage
Devices
• Some USB devices may not work properly with
this product.
• This product only supports external HDD`s that
are formatted in the FAT file system.
• USB 2.0 HDDs should be connected to a
separate power source. Otherwise, the USB 2.0
HDDs will not work.
• If multiple USB external storage are connected
together, only the music files in the first HDD will
be played.
• If a USB external device that has multi partition,
only the first partition which support file system
is recognized.
• Files with Digital Rights Management (DRM)
are not supported. DRM restricts unauthorized
access to a DRM file so that file is protected
from piracy.
• Even if a file has an .mp3 extension, the file
cannot be played if it is formatted in MPEG layer
1 or 2.
• Do not use an unrecognized USB hub.
• Only the first 15 characters of an audio file name
are shown on the product's display.
• Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB-
or more removable HDD may not be supported.
• It can take several minutes for the product to
recognize the files on some USB devices.
• Some USB devices (USB HDDs, in particular)
may cause a delay when moving from track to
track.
MX-JS8000-ZC_ENG-0412.indd 15 MX-JS8000-ZC_ENG-0412.indd 15
• With USB storage devices supporting USB
VER1.1 only, the product may access files
slowly or may not recognize the file properties.
• The maximum electrical current provided by
each USB port to connected USB devices is
0.5A (based on DC 5V).
• If there is no USB connection or STOP mode
lasts for more than 25 minutes, the product will
automatically turn off.
• Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones
may not be supported.

Searching for a Track Quickly

You can select a track directly without the 1 , 2
button.
CD-DA/MP3-CD/USB
1. Press the SEARCH button.
After pressing the SEARCH button, turn the
VOLUME/SEARCH JOG control on the main
unit to the left or right to select a desired
track.
Press the ¬ button when the desired track
2.
is displayed, then it moves to the selected
track.
If no input is detected for 3 seconds, then it
moves to the selected track.
• You can move to the selected track directly.
3. When searching is done, the track will
automatically start playing.

Using the MY LIST Function

You can program the playback order of up to 99
tracks of your choice.
1. Press the MY LIST button to display the
message below:
LIST 01---
(01= LIST number, ---= track number)
15
English
2016-04-12 2016-04-12 10:16:46 10:16:46