Related Manuals for DataOn Storage DNS-2640
Summary of Contents for DataOn Storage DNS-2640
-
Page 1: User Manual
DNS-2640 2U 24-Bays SAS III JBOD User Manual Version 1.0.0 Copyright © 2015- DataON Storage. All rights reserved. www.dataonstorage.com... - Page 2 Computer components and electronic circuit boards can be damaged by discharges of static electricity. Working on computers that are still connected to a power supply can be extremely dangerous. Follow these guidelines to avoid damage to the DNS-2640 or injury to yourself. ...
-
Page 3: Package Content
CD with user manual and drivers (1) Universal Rail Kit for DNS-2640 (1) HDD Screws(96) System requirements Servers with supported HBA/Raid adapter, refer to DNS-2640 support matrix reference for complete listing of supported adapters. SFF-8644 to SFF-8644 12Gbps SAS cable(s). Technical Support Please visit our website http://dataonsupport.dataonstorage.com/... - Page 4 DNS-2640 User Manual DNS-2640 Overview Form Factor 2U 24-bay 2.5" Drive Support 12Gb/s & 6Gb/s SAS 3.0 HDD and SSD Drive Form Factor 2.5” Disk Device I/O Controller Dual Redundant 12Gb/s SAS 3.0 Controller Module Host Interface Six 12Gb/s SAS 3.0 SFF-8644 connections per I/O...
-
Page 5: Leds On The Storage Enclosure
DNS-2640 User Manual LEDs on the Storage Enclosure Component Color Lights On Lights Off Flashing Blue Locate LED Identifies a storage enclosure Normal A component within the storage en- Amber Fault LED Normal closure needs attention. Green Power Power On Power Off ... - Page 6 DNS-2640 User Manual DNS-2640 Rear View Board #2 Board #1 Power Supply Power Supply Module 1 Module 2 Power Connector Important: Note the direction of the power supply unit. Insert the power supply with the right direction. All SAS port connectors are Mini-SAS HD (SFF-8644)
- Page 7 DNS-2640 User Manual DNS-2640 SIM Board LED Description Console parts for factory use only Component Color Lights On Lights Off Flashing Blue Identifies SIM Locate LED Normal Amber SIM Fault Fault exist Normal Power On Green SIM Power Power Off...
- Page 8 DNS-2640 User Manual DNS-2640 PSM Board LED Description Component Color Lights On Lights Off Power Standby Green DC Power Off, JBOD Standby DC Power On, JBOD active DC Power Green DC Power On No DC Power Locate LED Blue...
- Page 9 DNS-2640 User Manual Disk Drives Front LED and Tray Optional DNS-BJMB 9252 6Gb/s SAS Interposer for 2.5” Disk Tray SATA SSD/HDD Release button Disk Tray Handle Component Color Description Disk Activity LED Solid Green SAS Disk is ready ...
- Page 10 Install/Replace SAS Disk Before You Begin It is not recommend mixing different SAS SSD and SAS HDD in the same DNS-2640 system. If you have to, please use the following figures below to plan where you will be placing the disk drives.
- Page 11 DNS-2640 User Manual Follow these steps below to Install/Replace SAS disk in the disk tray. Step 1 a) Press the release button and open the disk tray handle. b) Remove disk carrier by pulling the disk tray handle out.
- Page 12 Step 2 Insert the SAS disk inside the tray and tighten the four 4 screws on the SAS disks. SAS disk Step 3 Slide in the HD tray back in the disk slot and close the disk tray handle. Step 4 Repeat Step 1 through 3 if you wish to install more HDD into the DNS-2640 storage ...
- Page 13 1. Verify that all connections are correct. 2. Turn on both circuit breakers on cabinet. 3. Make sure that power-on LED on all DNS-2640 are steady blue. 4. Power on the host lastly. Please make sure power on all DNS-2640 first before the server...
- Page 14 DNS-2640 User Manual Storage Enclosure Zoning This section describes the different DNS-2640 JBOD Storage Enclosure zoning options and drive grouping within each zoning configuration. The storage enclosure features provide for zoning on the I/O controllers. This allows the input ports on the I/O controllers to be assigned specifically to particular drives in the system.
- Page 15 DNS-2640 User Manual SAS I/O controller 1 SAS I/O controller 2 12 Drive slots per I/O controller To splits the 24 drive slots into 2 set of 12 drives, one set per I/O controller. Drive slots 1-12 are available to the I/O controller 1, and drive slots 13-24 are available to the I/O controller 2.
- Page 16 DNS-2640 User Manual SAS I/O controller 1 SAS I/O controller 2 8 drive slots per host pair To splits the 24 drive slots into 3 set of 8 drives, one set per pair of host connections for both I/O controller.
- Page 17 DNS-2640 User Manual SAS I/O controller 1 SAS I/O controller 2 4 drive slots per host pair To splits the 24 drive slots into 6 set of 4 drives, one set per pair of host connections for both I/O controller.