Removing the stand assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using your fingertips, lift the stand cover.
2
Slide and remove the stand cover at an angle away from the stand.
1
stand
3
back cover
3
Remove the screws that secure the stand bracket to the back cover.
14
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
2
stand cover
Before