Table of Contents
Advertisement
196
4-2. Driving procedures
When the parking brake is set automatically while the system is holding the brakes
■
The parking brake will not be released automatically. Perform one of the following proce-
dures to release the parking brake and confirm that the parking brake indicator light
turns off. (P. 193)
With the brake pedal depressed, operate the parking brake switch.
●
Fasten your seat belt, check that the shift lever is in either D or R and slowly depress the
●
accelerator pedal.
Warning message and buzzers
■
Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution. (P. 406)
WARNING
When the vehicle is on a steep incline
■
When using the brake hold system on a steep incline exercise caution. The brake hold
function may not hold the vehicle in such a situation.
When stopped on a slippery road
■
The system cannot stop the vehicle when the gripping ability of the tires has been
exceeded. Do not use the system when stopped on a slippery road.
NOTICE
When parking the vehicle
■
The brake hold system is not designed for use when parking the vehicle for a long
period of time. Turning the power switch off while the system is holding the brake may
release the brake, which would cause the vehicle to move. When operating the power
switch, depress the brake pedal, set the parking brake and shift the shift lever to P.
GS450h_OM_OM30E99U_(U)
Advertisement
Table of Contents
