Adjusting The Stands; Power Connection; Water Connection - Beko BFSB3622SS User Manual

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.

3.4. Power connection

A
WARNING:
multi sockets in power connection.
B
WARNING:
must be replaced by Authorized
Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the product to an earthed socket with
120 V/60 Hz voltage. The plug must comprise
a 10-13 A fuse.
Do not use extension or
Damaged power cable
8 / 29 EN
• Do not use multi-group plug with or without
extension cable between the wall socket and
the refrigerator.

3.5. Water connection

Depending on the model of the refrigerator, you
can connect it either to a demijohn or water mains.
First you must connect the water hose to the
refrigerator.
C
In cases where a demijohn is used, a
separate pump must also be used.
A
WARNING:
any, must be unplugged during connection.
C
Following parts may not be supplied with
your product since they are not required
when using a demijohn.
Your product comes with an internal water filter for
use inside the fridge. Part number of the filter is
4918450200 and you can use this part number
when ordering replacement filters.
Refrigerator and the pump, if
Refrigerator / User Guide