Troubleshooting; 6.1 No Signal On The Uhd Tv - Strong srt rb-4k User Manual

6

Troubleshooting

6.1 No signal on the UHD TV

Check if the HDMI cable is securely connected.(HDMI 2.0 Cable required)

Check if you have selected the correct HDMI input on your UHD TV.

Check the antenna cable, replace the cable, or connect the cable to the receiver securely.

Set the values of the tuner parameters correctly in the installation menu.

Check the antenna connections.

6.2 Cannot turn on your media box.
Check if the power connector is correctly connected into the DC socket of your TV and to

the media box.
Check if the power is turned on.

6.3 Cannot connect to network
Ensure the network cable is securely connected and the Ethernet is functioning

Ensure the Wi-Fi network is connected and the security key for the encrypted network is

entered correctly.
Make sure you select the correct IP address settings.

6.4 Some UHD TV cannot display the entire picture
Setup the screen ratio on your UHD TV as automatic.

On your UHD TV, go to Menu >Screen >Press arrow buttons to select the ratio type >

Select automatically to display the entire screen.
6.5 The remote control does not work
Make sure the batteries are in good condition and that they are correctly inserted.

17