Table of Contents
Advertisement
Warning (Continued)
a collision with another vehicle
you are following. This can occur
when vehicles suddenly slow or
stop ahead, or enter your lane.
Also see Alerting the Driver in
this section. Complete attention is
always required while driving and
you should be ready to take
action and apply the brakes. See
Defensive Driving 0 211.
Warning
ACC will not detect or brake for
children, pedestrians, animals,
or other objects.
Do not use ACC when:
On winding and hilly roads
or when the sensors are
blocked by snow, ice, or dirt.
The system may not detect
(Continued)
Warning (Continued)
a vehicle ahead. Keep the
entire front of the vehicle
clean.
Visibility is low, such as in
fog, rain, or snow
conditions. ACC
performance is limited under
these conditions.
On slippery roads where
fast changes in tire traction
can cause excessive
wheel slip.
Driving and Operating
: Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ : Press briefly to resume the
previous set speed or to increase
vehicle speed if ACC is already
activated. To increase speed by
1 km/h (1 mph), press RES+ to the
first detent. To increase speed to the
next 5 km/h (5 mph) mark on the
speedometer, press RES+ to the
second detent.
SET : Press briefly to set the
speed and activate ACC or to
decrease vehicle speed if ACC is
already activated. To decrease
speed by 1 km/h (1 mph), press SET
to the first detent. To decrease
speed to the next 5 km/h (5 mph)
mark on the speedometer, press
SET to the second detent.
: Press to disengage ACC
without erasing the selected set
speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
247
Advertisement
Chapters
Table of Contents
