1. Manuals
  2. Brands
  3. Tecnet Manuals
  4. Two-Way Radio
  5. TS-2116
  6. User manual

Tecnet TS-2116 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS-2116 and is the answer not in the manual?

Questions and answers

Summary of Contents for Tecnet TS-2116

  • Page 2 Welcome Thank you for your purchase. We are confident that the function and quality will bring you stable, reliable, and clear communication. Please read this manual before operating the radio.
  • Page 3 Ergonomic & Light Design Scan CTCSS/DCS 16 Channels Programmable Key LED Indicator Light Auto Battery Save Voice Prompts Wired Cloning Time-out-Timer TS-2116/TS-2416...

  • Page 4: Table Of Contents

    …………………….…………… Product Inspection ………………………………….…………… Appendix II: Technical Terms ……………….…………… Getting Started …………………….…………… Squelch …………………………….…………… Appdendix III: Frequency & Tone Chart TS-2116 (VHF) Attaching & Removing ………………………………….…………… ………….…………… Appdendix IV: Frequency & Tone Radio Overview Scan ………………………………….…………… …………………….…………… Chart TS-2416 (UHF)

  • Page 5: Safety Information

    Safety Information Please read the following safety guidelines. Nonobservance of these guidelines may cause danger or FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY violation of law. The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC Don’t transmit with antenna detached from the radio or don’t damage or change antenna type.

  • Page 6: Product Inspection

    Getting Started Product Inspection Charging the Battery Thanks for choosing the TecNet TS-2000 Series radio. Before use, please check that the following contents are included: Please charge the battery as follows: 1.Turn off the radio for optimum charging. 2.Plug the AC connector of the adaptor into an AC (110V) outlet.

  • Page 7: Attaching & Removing

    Attaching & Removing Attaching & Removing the Belt Clip Attaching & Removing the Antenna Attaching External Audio Accessories Attaching & Removing the Battery To attach the belt clip, secure the belt clip with the 2 1. To attach, insert the antenna into the connector on Pull down the cover of earphone/microphone jack screws provided (Phillips head screwdriver the top of the radio by holding the antenna at its...

  • Page 8: Radio Overview

    Radio Overview Antenna Programmable Key Antenna with screwed connector is required for Default is battery check with short press and proper transmit and receive of radio. monitor function with long press. Channel Selector Audio Jack/Data Port Rotate clockwise or counter clockwise to select Connect the earphone/microphone or data cable.

  • Page 9: Basic Operation

    Basic Operation 1. Turn On/Off 2. Adjust Volume 3. Channel Selection 4. Make a Call Turn on the radio by rotating Power Switch/Volume Rotate Power Switch/Volume Control knob to adjust Rotate the channel knob to select operating channel To make a call, press PTT key and speak into the Control knob clockwise until a click is sounded.

  • Page 10: Advanced Operation

    PTT (programmable key). This allows Authorized TecNet Dealer. 2.This function is disabled/enabled through the the squelch to open on the radio so any received programming software.

  • Page 11: Voice Prompts

    Squelch Levels scanning and stop on that channel for the duration Voice Prompts of the call. 1.Through adjusting squelch level, the radio with a 1.Channel voice: the radio would report the channel lower squelch level allows weak signals to be information when you change the channel.

  • Page 12: Optional Accessories

    Optional Accessories Cloning can be done with the programming Optional Accessories are available according to your requirements, including: software and cloning cable. Connect the master radio to the slave radio with the cloning cable, and then turn on the slave radio. Press left lower key on master radio for about 3 seconds until LED glows red, release it, then LED glows red and green at the same time, which...

  • Page 13: Trouble Shooting

    Trouble Shooting Care and Maintenance Use a mild detergent (not corrosive chemicals) and These recommendations can help you use the radio cloth to clean the casing. effectively and years of continued use. Problem Solution Note: The battery power may be insufficient. Please charge current battery Keep the radio dry.

  • Page 14: Warranty Statement

    Warranty Statement for the reinstallation of the product. Appendix TecNet shall have no obligation to make repairs or replacement TecNet International, Inc. offers to the original end user: of product which results from normal wear and tear, or Appendix I: Specification...
  • Page 15 Appendix II: Technical Terms In the on condition, the radio is receiving all audio signals. CTCSS/DCS is a tone attached to an audio signal. If the CTCSS or DCS tone of the transmitter matches that of the receiver, the Allows the radio to receive calls on multiple channels. speaker is unmuted and the audio will be heard.
  • Page 16 Appendix III: Frequency & Tone Chart TS-2116 (VHF) Appendix IV: Frequency & Tone Chart TS-2416 (UHF) TecNet TS Series TecNet TS Series Model TS-2116 VHF Radio Model TS-2416 UHF Radio Transmit (TX) Receive (RX) CTCSS Tone Transmit (TX) Receive (RX)

This manual is also suitable for:

Ts-2416

Table of Contents