Advertisement

Hazer DHZ-660
USERS MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hazer DHZ-660 and is the answer not in the manual?

Questions and answers

Summary of Contents for dj power Hazer DHZ-660

  • Page 1 Hazer DHZ-660 USERS MANUAL...
  • Page 2: Table Of Contents

    Hazer DHZ-660 Art.No.: 102634 Table of contents Safety instructions ....................3 1.1. For safe and efficient operation..............3 Intended use of the device ................4 2.1. Overhead installation ..................5 2.2. Connections ....................6 2.2.1. Electrical connections ................6 2.2.2.
  • Page 3: Safety Instructions

    Hazer DHZ-660 Art.No.: 102634 660 Art.No.: 102634 1. Safety instructions Safety instructions • This device is suitable for indoor use (not outdoors) only. This device is suitable for indoor use (not outdoors) only. This device is suitable for indoor use (not outdoors) only.
  • Page 4: Intended Use Of The Device

    Hazer DHZ-660 Art.No.: 102634 2. Intended use of the device This device was developed for professional use on stages, in discos, theatres etc. The device is only approved for a connection up to 230 V 50/60 Hz alternating current and only for indoor use.
  • Page 5: Overhead Installation

    Hazer DHZ-660 Art.No.: 102634 660 Art.No.: 102634 Never use solvents or aggressive detergents for cleaning. Use instead of this a Never use solvents or aggressive detergents for cleaning. Use instead of this a Never use solvents or aggressive detergents for cleaning. Use instead of this a damped cleaning rag.
  • Page 6: Connections

    Hazer DHZ-660 Art.No.: 102634 It is not allowed to install the device in the grip area of people. If the device may hang from the ceiling or from high beams, the use of truss systems is mandatory. The device may not be installed so it can swing freely in the room.
  • Page 7: Dmx Connections

    Hazer DHZ-660 Art.No.: 102634 2.2.2. DMX connections Make sure that you use shielded cable. 3pol or 5pol XLR cables are suitable. 2.3. DMX connection with terminator Where the DMX cable has to run a long distance or the equipment is operated in an electrically noisy environment like a disco for installations, we recommend using a DMX terminator.
  • Page 8: Introduction

    Hazer DHZ-660 Art.No.: 102634 3. Introduction Thank you for choosing a device from DJPower. Before usage please read this manual carefully. 3.1. Item delivered 1x Hazer DHZ-660 Power cord IEC Manual (German / English) 3.2. Product description 1. On/Off switch 2.
  • Page 9 Hazer DHZ-660 Art.No.: 102634 4. Start-up Attention! Remove before start-up every packing material. 1. Fill the tank with fluid. Make sure that there is always enough fluid in the tank. 2. Connect the device to the power supply.. 3. The display shows „READY TO HAZE“.
  • Page 10: Structure Oft He Menu

    Hazer DHZ-660 Art.No.: 102634 4.1.1. Structure of the menu Menu Setting Function Interval Set 5s – 200s To set the interval. Duration Set 5s – 200s To set the duration of output. DMX 512 1 – 512 To set the DMX address.
  • Page 11: Technical Data

    Hazer DHZ-660 Art.No.: 102634 5. Technical data Voltage AC 220 V – 240 V; 50/60 Hz Power consumption max. 500 W Fuse 5 A/250 V Heating Power 500 W Heating time Tank volume 2,5 Liter Output volume 85 m³/min Fluid consumption @100%...
  • Page 12 Hazer DHZ-660 Art.No.: 102634 For you notes: 12 / 15...
  • Page 13 Hazer DHZ-660 Art.No.: 102634 For your notes: 13 / 15...
  • Page 14 Hazer DHZ-660 Art.No.: 102634 For your notes: 14 / 15...
  • Page 15 Hazer DHZ-660 Art.No.: 102634 Importer: B&K Braun GmbH Industriestraße 2 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com 15 / 15...

Table of Contents

Save PDF