GVA GRH12K15 Instruction Manual

1200w radiant wall heater

Advertisement

Quick Links

M.E.W. (Australia) Pty Ltd
15 Vaughan St
Essendon Fields VIC 3041
ACN 152 719 036
1300 725 885
customercare@gvaproducts.com.au
gvaproducts.com.au
While every effort has been made in the preparation of this instruction manual, the publishers cannot be held
responsible for the accuracy of the information contained herein or any consequences arising from it.
1200W RADIANT
WALL HEATER
GRH12K15
Instruction Manual
GVA PRODUCTS DETAILS
File Name: IM_GRH12K15_OLN9104_v0.08_TC241215
Name: 1200W RADIANT WALL HEATER
Model Number: GRH12K15
Proof Version: Proof 2
Date: 24th Dec 2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GRH12K15 and is the answer not in the manual?

Questions and answers

Summary of Contents for GVA GRH12K15

  • Page 1 While every effort has been made in the preparation of this instruction manual, the publishers cannot be held responsible for the accuracy of the information contained herein or any consequences arising from it. GVA PRODUCTS DETAILS Model Number: GRH12K15 File Name: IM_GRH12K15_OLN9104_v0.08_TC241215 Proof Version: Proof 2...
  • Page 2: Electrical Connection

    Contents Electrical Connection • Before connecting the appliance, make sure that the specifications on the rating label correspond to the Introduction local electrical supply network. • The electrical safety of this appliance can only be assured if it has been correctly grounded. Guide to the Appliance •...
  • Page 3: Wall Installation

    Introduction Wall Installation IMPORTANT: If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or • Before using your new heater, please carefully read through the following instructions. similarly qualified person to avoid hazard. Keep this booklet in a safe place so you can consult it later.
  • Page 4 Safety Information and Warnings • Do not use this appliance outdoors, or on wet surfaces. Avoid spilling liquid on the appliance. • In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

Table of Contents