IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surface. Use handles or knobs. 3. To protect against electric shock do not immerse cord, plugs, or housing in water or other liquid. 4.
HOUSEHOLD USE ONLY NOTES ON THE POLARIZED PLUG This appliance has a polarized plug, to reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way, if the plug does not fit fully into the outlet, reverse the plug, if it still does not fit, contact a qualified electrician, do not attempt to modify the plug in any way.
Heating Power Indicator Light Indicator Light On/Off Button Time/Temp Button Digital Display Increase/Decrease Time/Temp Filter cover Black filter White filter Basket ASM Stainless Steel Lid with Double filters and window Note: The large basket can be loaded about 1200g potato chips. USING FOR THE FIRST TIME Remove all the packaging materials, labels and/or stickers from the deep fryer.
ASSEMBLYING THE DEEP FRYER 1. Place the oil reservoir into the deep fryer housing. (Fig. 1) 2. Insert the guide edges on the control panel into the guide rails mounted on the metal body. (Fig.2). Fig.1 3. Slide the guide edges down as far as they can go. Guide Edges Note: The deep fryer has an automatic safety switch (Fig.3) to ensure that the unit will not operate unless the control panel has...
Fig. 5 2. You can use blended vegetable oil, corn oil, or canola oil. Do not use olive oil, margarine, lard or drippings. Never mix old and new oil together or different oils and fat. Using Solid Fat: WARNING: Do not put solid shortening in the oil reservoir or the frying basket. 1.
“Using the Preprogrammed Settings” chart. 2. Press the “START/PAUSE” button to preset the oil. The green “Heating” light will illuminate to indicate that the oil is preheating. 3. Once the oil is preheated, it will beep 3times circularly and continually, until you press“START/PAUSE”on to change temperature.
• It is normal for steam to escape through the openings of the lid while frying. • Avoid standing too close to the deep fryer while it is working. • Do not mix different oils or new and old oil together. •...
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE The fryer is not 1. The control assembly is not 1. Re-attach the control panel assembly operating installed correctly. 2. Insert the plug into the electrical wall 2. The plug is not connected to outlet. the electrical wall outlet. 3.