Page 1
Assembly Instructions RED BISTRO SET Product No. 299-2631-6 Model No. S-BS029-A GREEN BISTRO SET Product No. 299-2639-0 Model No. S-BS029-AG Warning: Repeated assembly can weaken the locking ability of the washers. Please periodically check all bolted connections on your bistro to ensure they are tight and secure.
Page 2
Parts List: Description Quantity Table Top Leg 1 Leg 2 Back Seat Armrest 1 Armrest 2 Bolt M6 x 12 Washer M6 Bolt M6 x 15 Bolt M6 x 32 Wrench M6 Bolt cover Assembly Instructions: Put all parts on a clean, soft, level surface before assembling. Check to make sure you have all parts before you start assembling.
Page 3
Step 2: Attach the ring of leg 2(C)to the ring of leg 1(B). See fig.2. Then connect leg 2(C)to table top (A)using bolt (AA)and washer (BB). Then have bolt cover (FF) covered on bolt(AA).See fig.3. Then turn over the whole table at upright position.
Page 4
Step 3: Connect the front end of seat (E) to armrest (F/G) using bolt (CC) and washer (BB). Then have bolt cover (FF) covered on bolt(CC). See Fig.4. Step 4: Connect the back end of seat (E) to armrest (F/G) using bolt (CC) and washer (BB). Then have bolt cover (FF) covered on bolt(CC).
CARE AND MAINTENANCE: • Before using, clean the bistro set completely with a soft dry towel. • Do not place your bistro set in wet conditions where there is a risk of rust developing. • When not in use, wipe off any dirt or loose objects, wash with water, rinse thoroughly and dry completely.