Troubleshooting - Philips 150E6 User Manual

Troubleshooting

Troubleshooting
• Safety and
Troubleshooting
• FAQs
This page deals with problems that can be corrected by the user. If the problem still persists after
you have tried these solutions, contact your nearest Philips dealer.
• Common
Problems
• Imaging
Common Problems
Problems
• Regulatory
Information Having this problem
• Other Related
Information
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Display position is incorrect
file:///D|/My%20Documents/dfu/150E6FB/ENGLISH/150e6/SAFETY/saf_troub.htm (1 of 3)2005-05-27 9:26:42 AM
Check these items
Make sure the Power cable is plugged to the
wall and the back of the monitor.
Firstly, ensure that the power button in front
of the monitor is in the OFF position, then
press it to ON position again.
Make sure the computer is turned on.
Make sure the signal cable is properly
connected to your computer.
Check to see if the monitor cable has bent
pins.
The Energy Saving feature may be activated
Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Set-Up Guide).
Check to see if the monitor cable has bent
pins.
Make sure the computer is turned on.
The Auto Function is designed for use on
standard Macintosh or IBM-compatible PCs
running Microsoft Windows.
It may not work properly if you are using non-
standard PC or video card.
Press the Auto button.
Adjust the image position using the Adjust
Position of OSD.