About The Temperature Controls - Hoover HSXS5085 Service Manual

About the temperature controls.

The unit will have one of the temperature controls shown below:
External Set Point
Controls (0-9)
About the temperature controls
4
The temperature controls are preset in the factory at 5 for both the refrigerator and
freezer compartments.
To adjust the set point temperature, press the WARMER or COLDER button on either the
Freezer or Refrigerator side. The set point light will come on. Press WARMER or COLDER
until the desired setting is reached.
Several adjustments may be required. Each time you adjust controls, allow 24 hours after
each adjustment for the refrigerator to reach the setting you have selected.
Setting either or both controls to 0 stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
Control settings will vary based on personal preferences, usage and operating
conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
Ambient Room Temperature Limits
This refrigerator is designed to operate in ambient temperatures specified
by its Temperature Class, which is marked on the rating plate.
Temperature
Class
Extended-
Temperate
Temperate
Subtropical
Tropical
NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature
and frequency of door openings. Adjust temperature controls as required to compensate for these factors.
Symbol Ambient Temperature
Maximum
SN 32°C
N 32°C
ST 38°C
T 43°C
Minimum
10°C
16°C
18°C
18°C