Table of Contents
Advertisement
Quick Links
User' s Guide
SNOW DISPENSER (NSD-201MW)
In order to use properly the machine, please read carefully this guide
Before using the machine, please read thoroughly "Precautions and
Warnings for Safety"of this guide
Please keep this guide in the spot where user can always access easily
The guarantee document is included in this guide
This ice machine' s performances and design may be changed
Advertisement
Table of Contents
Related Manuals for Korea Nakajo NSD-201MW
Summary of Contents for Korea Nakajo NSD-201MW
- Page 1 User’ s Guide SNOW DISPENSER (NSD-201MW) In order to use properly the machine, please read carefully this guide Before using the machine, please read thoroughly “Precautions and Warnings for Safety”of this guide Please keep this guide in the spot where user can always access easily The guarantee document is included in this guide This ice machine’...
-
Page 2: Table Of Contents
₩ Precautions and Warnings for Safety The contents are for using the product with convenience and safety, please read this user’ s guide and use it properly Contents 1-1 Precautions and warnings for safety 1. Preparation 1-2 Installing and grounding the product 1-3 Names of each part 2-1 Installing tank and hose for materials 2-2 How to start to operate the snow dispenser... -
Page 3: Precautions And Warnings For Safety
Preparation 1-1. Precautions and warnings for safety Marks and Meanings of [Warning] and [Precaution] Mark to express possibilities of dangers and of injuries or serious wounds Warning in case of ignoring this mark and misusing the machine Mark to express possibilities of dangers and of injuries, serious wounds, or Precaution physical damages in case of ignoring this mark and misusing the machine Warning... - Page 4 Preparation 1-1. Precautions and warnings for safety Precautions When electric cord is damaged, in order to When washing the machine, please use prevent danger, it should be repaired by neutral detergent only and remove service technician moisture after cleaning ● If not, it may cause fire, ●...
-
Page 5: Installing And Grounding The Product
Preparation 1-2. Installing and grounding the machine This product is for AC 220V only Warning - Please use power plug with AC 220V wall socket - Please use wall socket with higher than 15A - In order to prevent severe electric shock and damages to the machine, please install proper grounding line defined in electric safety regulation Connecting water drainage hose Connecting cooling water... -
Page 6: Names Of Each Part
Preparation 1-3. Names of each part Touch panel Ice making window Ventilating opening Front cover Power switch(ELB) Material supply pump Power cord Cooling water supply IN / OUT Ice material sensing sensor Ice making drum Grounding terminal / Cable Snow ice scraping cutter ~Back side₩... -
Page 7: Installing Tank And Hose For Materials
Operation 2-1 Installing tank and hose for ice materials Installing material supply hose ① After pulling up lever pin, make a little crack ② Insert middle part of the hose out of bracket. In order to avoid hose twisted, roll it into roller and attach it at groove on lever and insert lever pin into hole and fix hose on bracket ③... - Page 8 Operation 2-2 How to start to operate the ice machine Open the valve of cooling water supply piping connected to the machine ● Water is supplied to the machine ● Please check water leakage in the connections of water supply hose Insert power plug to grounded 220V wall socket ●...
- Page 9 Operation 2-3 How to stop to operate the ice machine & keeping Automatic Completion When completing the set time, ice making operation automatically stops ● During ice making operation, FND displays the left ice making time and when FND displays , the machine stops with beep sounds Manual Completion...
-
Page 10: How To Choose Operating Mode Of The Snow Dispenser
Operation 2-4 How to choose operating mode of the ice machine Button Functions Increase time Drum rotation (FND) Amount for Amount for one person multiple persons Decrease time T/Table START/STOP FND : When turning on power switch(ELB), the lamp is on and drum operation, set time, accumulated time, and error time are displayed ▶... -
Page 11: Management
Management 3-1 How to clean the snow dispenser Cleaning snow dispenser (Daily cleaning) After ice making, drum surface, ice making material container, ice making dish, drainage dish, and water supply hose should be cleaned daily(After using the machine, if the machine is not cleaned, bacteria and bad odor will happen because ice making materials goes bad) ▶... -
Page 12: How To Check Malfunctions And To Manage And Repair Them
Management 3-2 How to check malfunctions and to manage and repair them Symptoms Checking Measures Flashing of front start button Please check displays of number Refer to alarm functions of board on front operational panel malfunctions Snow ice is not made ①... -
Page 13: Product Functions And Specifications
Product Functions and Specifications Specifications Manufacturer ICT Nakajo Co.Ltd Product / Brand SNOW DISPENSER / ICEVAN Model name NSD - 201MW Voltage AC 220V 50Hz, AC 220V 60Hz Power Current Type R - 404A Cooling Agent Amount 600g Ice making agent Material container Method of supply... - Page 14 Memo...
- Page 15 Warranty Specifications Warranty Product Name SNOW DISPENSER Warranty period Model Name NSD-201MW 1 year Product Number ▶ This product is manufacture red by thorough quality management and strict test and examination ▶ This product is under free repair for malfunctions within one year since the date of purchase ▶...
- Page 16 ICT NAKAJO Manufacturer ICT Nakajo Co.,Ltd 65 Yongdu-ro, Daegot-myeon, Gimpo-si, Gyeonggi-do, Korea Tel:+82-31-998-0671 Fax:+82-31-998-0644 www.icevan.co.kr...
Need help?
Do you have a question about the NSD-201MW and is the answer not in the manual?
Questions and answers