Setting Up A Configuration Profile - Dell 1150 Series Quick Start Manual

Read the information, and then close the window by
5
clicking the X in the top-right corner of the window.

Setting Up a Configuration Profile

Perform the following procedure on each computer that will
connect to the network:
To use Client Manager, click the Start button, point to
1
Programs—> Dell TrueMobile 1150, and then click
Client Manager. Or, you can double-click the
TrueMobile 1150 Client Manager icon on your
Windows desktop, and then click the icon
appears in the system tray.
In the TrueMobile 1150 Client Manager window, click
2
Actions.
In the Add/Edit Configuration Profile window, make
3
sure that the first profile in the list is selected.
If you have a peer-to-peer group network, click Peer-to-
4
Peer Group in the right-hand box of the selected
profile.
If you have an infrastructure network that uses a
Residential Gateway, click Residential Gateway in the
right-hand box of the selected profile.
If you have an infrastructure network that uses an access
point, click Access Point in the right-hand box of the
selected profile.
Click Edit Profile.
5
In the Edit Configuration window, type your Network
6
Name in the Network Name field, ensure that Enable
Data Security is checked, and then enter an Encryption
Key in the Encryption Key field (an Encryption Key is
optional).
Click OK, and then click OK again.
7
Click OK again.
8
If you use and access point, the setup is complete, and
you can now connect to the Internet. If you are setting
14
Quick S tart G uide
that