Page 3
(If you want to connect internet wirelessly, please refer to Q Station User Guide.) 3) Connect the Audio Cable from your Q Station to the AUX of your stereo or speaker. 4) Make sure the indicator light of Q Station is blinking with red (left) and blue (right).
Page 4
5) Click “Play” button to play music. Notice: • By default, Q Station Speaker Name is “bellmusicXXXXXX”.(XXXXXX is the last 6 digit of your MAC) • DLNA protocol allows you to stream music to the stereo or speaker which is connected to the Q Station.
Page 5
On BellQ main page, click to enter Network page: Set password for your Q Station SSID Click Basic Settings to modify the Q Station SSID & Password. Change your speaker name Click Music Service to modify the Speaker Name. Connect to internet wirelessly...
Page 6
(XXXXXX is the last 6 digit of your MAC) Figure 8: Play Music Page Figure 9: The second page Figure 10: Play on mobile Figure 11: Play on device (For more details, you can refer to Q Station User Guide from belleds.com.)