Note: Depending on the operating system and playback software used, driver software and specific
software settings may be required in order to enable the computer to play audio into Sonica DAC.
Please visit the support page on OPPO Digital website for driver download and additional help guides.
Optical Digital Audio Input
You can connect a device with an optical digital output into the Optical Digital Audio Input of Sonica
DAC using an optical digital (also known as a TOSLINK cable). The digital signal will be converted by the
ES9038PRO DAC and sent to the analog line level outputs. This input source is labeled OPTICAL on the
Source Selection screen.
Coaxial Digital Audio Input
You can connect a device with a coaxial digital output into the Coaxial Digital Audio Input of Sonica DAC
using a coaxial digital (75 ohm) cable. The digital signal will be converted by the ES9038PRO DAC and
sent to the analog line level outputs. This input source is labeled COAXIAL on the Source Selection
screen.
Settings and Advanced Operations
Settings and advanced operations of the Sonica DAC can be accessed by pressing and rotating the
9