Advertisement
Advertisement
Table of Contents
Related Manuals for ELICA ANDANTE
Summary of Contents for ELICA ANDANTE
- Page 1 EN Instruction on mounting and use...
- Page 7 EN - Instruction on mounting and use Closely follow the instructions set out in this manual. All With regards to the technical and safety measures to be responsibility, for any eventual inconveniences, damages or adopted for fume discharging it is important to closely follow fires caused by not complying with the instructions in this the regulations provided by the authorised authorities.
-
Page 8: Ducting Version
Installation The hood is designed to be used either for exhausting or filter When installing the product, it is recommended to keep a version. minimum distance of 400mm between the worktop and any components laid on top of the hood. This is to let the suction panel move upwards (opening) and downwards (closing) without any obstacles, and to facilitate access to the hood controls on the panel. - Page 9 the five possibilities (Fig. 7a) and install the union Mounting supplied. Before starting to mount the appliance, make sure that no • Put the metal box containing the electronic components component is damaged, otherwise contact the dealer and stop in an easily accessible area for any assistance mounting.
-
Page 10: Operation
With the hood switched on (at any speed) and the panel Operation open, key T5 switches off the hood first (and, if they are Use the high suction speed in cases of concentrated kitchen on, it switches off the lights as well) and then closes the vapours. - Page 11 Use of the remote control Maintenance of the remote control the remote control can control all the functions of the hood: Cleaning the remote control: Clean the remote control with a damp cloth and a neutral Selection of the suction speeds (powers) solution of detergent without abrasive substances.
-
Page 12: Maintenance
Maintenance Replacing lamps Attention! Before any cleaning or maintenance operation, Disconnect the hood from the electricity. disconnect the hood from the power supply removing the Warning! Prior to touching the light bulbs ensure they are plug or switching off the master switch of the house or cooled down.
Need help?
Do you have a question about the ANDANTE and is the answer not in the manual?
Questions and answers