DIGISYNTHETIC DS428E(WiFi) Owner's Manual page 6

3.3 Program Management and Configuration Setting
3.3.1 Recall an User Program
®
Continuously press RECALL till the menu (LOAD USER
PROGRAM) as the below picture
® Rotary
Rotate the Encoder to change the program number.
®
Press SAVE/ENTER to finish the recall operation.
3 LOAD USER PROGRAM：1
MEMORY
Loading User Program
Please Wait．．．．．．
3.3.2 Store an User Program
®
Press RECALL to return to the root menu if entered channel
menu, or skip this step.
®
Then press SAVE / ENTER till the menu (STORE USER
PROGRAM) as the below picture displays.
Press CURSOR ◀ or ▶ to move the cursor.
®
®
Rotate the Rotary Encoder to change program number and
program name.
®
Press SAVE/ENTER to finish the storing operation.
4 STORE USER PROGRAM：1
MEMORY
4 STORE USER PROGRAM：1
Are you sure ? NO
S t o r i n g U s e r P r o g r a m
Please Wait．．．．．．
3.3.3 Recall a Preset Program
®
Press RECALL to return to the root menu if entered channel
menu, or skip this step.
Then press MAIN MENU ◀ or ▶ till the menu (LOAD PRESET
®
PROGRAM) as the below picture displays.
®
Rotate the Rotary Encoder to change the preset program number.
®
Press SAVE / ENTER to finish the operation of recall preset.
2 LOAD PRESET PROGRAM：1
4x2Way Crossover
Loading Preset
Please Wait．．．．．．
3.3.4 Erase an User Program
®
Press RECALL to return to the root menu if entered channel
menu, or skip this step.
Then press MAIN MENU ◀ or ▶ till the menu(ERASE USER
®
PROGRAM) as the follow picture displays.
displays .
®
Rotate the Rotary Encoder to change the preset program number.
®
Press SAVE / ENTER to finish the operation of erasing user
program.
5 ERASE USER PROGRAM：1
MEMORY
5 ERASE USER PROGRAM：1
Are you sure ? NO
E r a s i n g U s e r P r o g r a m
Please Wait．．．．．．
3.3.5 Device Address Setting
®
Press RECALL to return to the root menu if entered channel menu,
or skip this step.
Then press MAIN MENU ◀ or ▶ till the menu(SET DEVICE
®
ADDRESS) as the below picture displays.
®
Rotate the Rotary Encoder to change the device address.
®
Press SAVE / ENTER to finish the operation of device address
setting.
6 SET DEVICE ADDRESS
DEVICE ID： １
Setting Device address
Please Wait．．．．．．
3.3.6 Lock / Unlock the Device
®
Press RECALL to return to the root menu if entered channel menu,
or skip this step.
®
Then press MAIN MENU
as the below picture displays.
◀ or ▶
®
Press CURSOR
®
Rotate the Rotary E ncoder to change the lock type and password.
®
Press SAVE/ENTER to finish the lock operation.
7 LOCK DEVICE
TYPE: Change & View
Password: 12345678
7 LOCK DEVICE
TYPE: Change & View
Are you sure ? NO
5
◀ or ▶
till the menu (LOCK DEVICE)
to move cursor.
Lock succeed