Main Fuse - Hyundai IX35 2011 Owner's Manual

EL ENG 7.QXP 10/8/2010 2:15 PM
Maintenance
3. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
HYUNDAI dealer.
CAUTION
After checking the fuse box in the
engine compartment,
install the fuse box cover. If not,
electrical failures may occur from
water leaking in.
7 56
Page 56
■ Type A
securely
■ Type B

Main fuse

If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture
above.
4. Replace the fuse with a new one of the
same rating.
5. Reinstall in the reverse order of
removal.
OLM079052N
OEL070305