Advertisement
EN
NOTE: 1. Before you install the notebook SoundBar, ensure that a
working USB controller is listed in Windows Device Manager on
your computer. 2. Ensure that the notebook SoundBar is installed
properly before using. 3. Never unplug the USB connector while the
notebook SoundBar is playing sound.
System Requirements:
PC
Windows
98SE, Windows
®
Windows
2000, Windows
®
or Windows
Certified USB controller
Installation:
1
Slide down the clip (Fig. 1).
2
Clip the notebook SoundBar on the top of the notebook screen
and gently tighten the screw on the back (Fig. 1).
3
Plug the USB plug into a USB port on the notebook (Fig. 2).
4
Open your multimedia application software, and then adjust the
volume (Fig. 3).
5
When you have finished using the SoundBar, exit the multimedia
application software.
6
Unplug the USB cable from the notebook and release gently the
screw to remove the SoundBar from the top of the screen.
7
Wrap the USB cable and plug around the SoundBar in the slot, and
then store the notebook SoundBar in the pouch (Fig. 4 & 5).
Vista™
®
Mac
ME,
Mac OS9/OS
®
XP,
®
Built-in USB connection
X, or later
®
Advertisement
