LG CM2540 Owner's Manual page 27

Activate Bluetooth with LG
Bluetooth Remote app
LG Bluetooth Remote app helps to connect your
powered Bluetooth device to the unit.
1. Tap LG Bluetooth Remote app icon on the
home screen to open LG Bluetooth Remote app
application, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
CM2540-FG.AAUSLLK_3469-ENG.indd 27
,
Note
y BT app will be available in the software
version as follow;
Android O/S : Ver 2.3.3(or late)
iOS O/S : Ver 4.3(or late)
y While using Bluetooth, you may not activate
BT app. Disconnect Bluetooth device you
have connected before to use BT app
properly.
y If you use Bluetooth app for operation,
there would be some differences between
Bluetooth app and the supplied remote
control. Use the supplied remote control as
necessary.
y If you operate BT app with Bluetooth
device connected, the Blutooth
connection you have connected before
may be disconnected. (Depending on
the smartphone's O/S, this process has a
difference.)
y Depending on the Bluetooth device, BT.app
may not work.
y In Bluetooth function, if you use BT app, the
supplied remote control may not work.
y When using BT app for remote control, the
operation may differ from the supplied
remote control.
y According to the smartphone's operating
system, you have some differences for BT
app's operation.
y When your Bluetooth device have been
already connected with other unit,
disconnect the Bluetooth connection first.
Then you can control your unit through BT
app.
y The connection you've made may be
disconnected if you select other application
or change the setting of the connected
device via BT app. In such case, please check
the connection status.
y To prevent a malfunction, you are
recommended to connect only one device
to this unit.
y Don't connect your smart device by using
a cable to USB port. Or else the Blutooth
connection will be disconnected.
y After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
Operating 27
2
2014-05-15 �� 10:19:07