NATIVE UNION MM04i Instruction Manual page 17

By default, some phones (including Blackberry phones) will prompt
16
you to confirm whether you want to accept the connection from the
MM04i. If your phone keeps prompting you about the connection
to the MM04i, then you should change the setting on your phone
so that it considers the MM04i as a trusted or authorized connection
(please check your phone's instruction manual)
(On some phones you may need to change an additional security
setting to allow the phone and MM04i to reconnect to each other
automatically every time they come back into range. If your phone
keeps prompting you to accept the connection from the MM04i
every time you bring it back into range with the MM04i, then this
applies to you. Check your phone's instruction manual for more
details on how to change this setting on your phone.)
PAIRING AN ADDITIONAL DEVICE
You only need to pair your phone with the MM04i once. Once you have paired your phone
with the MM04i they will reconnect to each other in future without you having to repeat the
pairing process. If you need to pair an additional phone, simply:
1. Turn the MM04i off
2. Put the MM04i back into pairing mode by pressing and holding the MFB (O)
button for 5 seconds, until you hear a sound and you see the RED and BLUE led flashing
alternatively. Your MM04i is now ready to be paired.
3. Follow the STEP4 instructions to pair the MM04i with your new device.
Out of range
Automatic
Deconnection
Back into
range
Automatic
Reconnection