H264 NVR User’s Guide Preface Congratulations on your purchase of this product. Read this manual carefully and keep it in a safe place for any future reference. About this manual This user manual has been designed to provide you with information regarding your NVR and its many features and functions.
H264 NVR User’s Guide Important Safeguards 1) Please read this manual carefully before installing and using the machine to ensure your interests. 2) Do not use the power that does not match the power adapter. 3) Make sure to connect the ground to avoid thunder damage to the main chip before using the product.
H264 NVR User’s Guide Introduction This section covers unpacking your new NVR, its key features, and basic technical information about the product. Refer to later chapters for information on setting up and configuring the product in more detail. Package contents The package should contain all the following contents.
H264 NVR User’s Guide 1. Product Introduction 1.1 Product outline This device is a digital monitoring and recording product specially designed for the security field. It adopts standalone embedded processor and Linux operating system. The device combines with the latest technology in the IT field, such as video and audio compression/decompression, large capacity HDD record, TCP/IP network etc.
H264 NVR User’s Guide 1.3 Technical Spec Model LI-NVR-6109 System Main processor High performance embedded microprocessor-21 Operating system Embedded LINUX OS Video Network Video Input 9-CH Network video bandwidth 64Mbps Video output 1-CH CVBS(BNC), 1-CH VGA and 1-CH HDMI Video compression format H.264 Display Image Resolution 720P@30fps;960P@30fps;1080P@30fps...
H264 NVR User’s Guide 2. Product Views 2.1 Front panel Figure 1: NVR front panel Buttons Description ZOOM+ In PTZ mode, press to zoom in image ZOOM- In PTZ mode, press to zoom out image SEARCH Press to open Playback interface STOP Press to stop the playback FAST...
H264 NVR User’s Guide MENU: Press to open the main menu or confirm LEFT: Press to move cursor left; in PTZ mode, press to pan camera left RIGHT: Press to move cursor right; in PTZ mode, press to pan camera right ...
H264 NVR User’s Guide To connect USB device To connect VGA monitor HDMI HDMI video output interface Video Output Video output to connect TV or monitor (BNC) Audio IN To connect audio signal input Audio OUT To connect audio output ALARM Alarm control interface 2.3 Remote Control...
H264 NVR User’s Guide 3. Hard Drive Installation After you open the case, you should check whether there are obvious signs of damage and if the data line with front panel, power supply and the connection to the motherboard is loose. For initial use, please install the hard drive.
H264 NVR User’s Guide Note: Please keep the sticker which is very important to our after-sales service. When you contact our company's after-sales service, Please offer us the model name and series number on the sticker. 4. Basic Function Operation 4.1 System Login When the NVR boots up, the user must login and the system provides the corresponding functions with the user purview.
H264 NVR User’s Guide 4.3 Record Config Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter Main Menu Record Record Mode to set. Figure 5: Record Config Choose the corresponding channel number to set the channel.
H264 NVR User’s Guide 4.4 Playback There are two methods for you to play the video files in the hard disk. In the desktop shortcut menu. Main menuRecordPlayback Figure 6: video playback 1. Date and time Choose the date and time. Date with white border means the system date.
H264 NVR User’s Guide Special functions Single double-click the channel to see the single channel and next channel view double-click to back Full screen click the right key to see full screen view view Accurate Input time (h/m/s) in the time column playback then click play button.
H264 NVR User’s Guide 4.6 Motion Detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage function is turned on. Figure 8: Motion Detect Choose the set motion detect channel. Enable means that the motion detect function is on.
Page 17
H264 NVR User’s Guide Period Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divided into four time sections. ■ means the set valid. Interval Trigger the motion detect signal in the set time section. Click the left key of mouse or drag on the time blocks to select period .Grey means the set valid.
H264 NVR User’s Guide 4.7 Network Figure 9: Network Net Card You can choose cable network card or wireless network card DHCP Obtain IP address automatically(not suggested) Enable Note: DHCP server is preinstalled. IP address Set the IP address. Make it in the same segment with other network devices in LAN.
H264 NVR User’s Guide 4.8 Net Server Figure 10: Net Server PPPOE The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating PPP frames inside Ethernet frames. Enable Choose Enable to make sure all PPPOE settings available. User Name Apply the PPPOE user name.
Page 20
H264 NVR User’s Guide Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable- latency data networks. Enable Choose Enable to make sure all NTP settings available. Server IP Input the NTP server IP Time Zone Select the Time zone Update Period Set the update period...
Page 21
H264 NVR User’s Guide SMTP server Email server address. It could be an IP address or domain name. Domain name can be translated only it is the correct DNS configuration. Port Email server port number. User Name Apply the email server user name. Password Input the password corresponding to the user.
Page 22
H264 NVR User’s Guide DDNS Dynamic DNS (DDNS) is a method of automatically updating a name server in the Domain Name System (DNS), often in real time, with the active DNS configuration of its configured hostnames, addresses or other information. Enable Choose Enable to make sure all DDNS settings available.
Page 23
H264 NVR User’s Guide Enable Choose Enable to make sure all UPNP settings available. HTTP Route will automatically distribute HTTP port for the device, when IE viewing, it need this port(eg. 60.12.9.26:66) Router will automatically distribute TCP port for the device, when monitoring via CMS, it need this port.
Page 24
H264 NVR User’s Guide ARSP Domain name auto register. Set your user name, click “Enter” to register, click “Save” to save. If successful, you will get the domain name : username.edvrddns.com Make sure the network setup is correct before setting up ARSP. When the ARSP is successfully configured and start, you can input the domain name in the IE address column to visit.
H264 NVR User’s Guide 4.9 PTZ control PTZ Operation interface is as followed. Figure 11: PTZ control Interface Choose the dome camera input channel. Speed Set the PTZ rotation range. Default range: 1 ~ 8. Zoom Click button to adjust the zoom multiple of the camera.
Page 26
H264 NVR User’s Guide 1) Preset option Set a location for the preset, procedure is as follows: Step 1: In above Picture, click the Direction button will turn into preset position. Step 2: Write the preset points in the input blank, and you can also set the name of the point, then click the Set button.
H264 NVR User’s Guide 1) Cruise Between Points Settings Cruise lines is connected by multiple preset points, setting procedure is as follows: Step 1: set your preset points . Step 2: click button Patrol No., then write proper value into the Preset Points blank and interval blank, then click button Add .
H264 NVR User’s Guide 5. Restore factory settings Click Logout in Main Menu, there is a Restore Reboot button. You can also go to Main MenuAdvanced Restore.
Page 29
H264 NVR User’s Guide Glossary H264: H.264/MPEG-4 Part 10 or AVC (Advanced Video Coding) is a standard for video compression, and is currently one of the most commonly used formats for the recording, compression, and distribution of high definition video. ...
Page 30
H264 NVR User’s Guide VGA resolution of 640x480 means 640 dots (pixels) across each of the 480 lines. RJ-45: Registered Jack 45. RJ-45 type connections are used in Ethernet devices. Static IP address: A static IP address that is assigned manually and never changes.