Luminox 1140 series Instruction Manual page 6

Second counter
Minute counter
Push-button A
Push-button B
2 1
Hour counter 1 ⁄ second counter
10
2 1
Push-button B
Chronograph:
Intermediate or interval timing
Example:
Start: (start timing)
Display interval :
e.g. 10 minutes 10 seconds (timing
continues in the background)
* Making up the measured time:
(the 4 chronograph hands are quickly
advanced to the ongoing measured time)
Stop: (Final time is displayed)
Reset:
The 4 chronograph displays are returned
to their zero position.
Please note:
* Following , further intervals or inter-
mediates can be displayed by pressing
push-button B (display interval / make up
measured time, ...)
Setting the date (quick mode)
Pull out the crown to position II (the watch
continues to run).
I II
Tu rn the crown until the correct
date
3 1
Push the crown back into position I.
Please note:
During the date changing phase between
9 PM and 12 PM; the date must be set to the
date of the following day.
An extreme acceleration in setting the date
I II
with quick mode can induce a false date indi-
cation. The synchronization is re-established
0 1
by setting the date from 01 till 31 (crown in
position II).
appears.
1