Also, a better understanding of some specific features of the KUBIX series will help you to operate it to its full potential. With a continuous evolution of techniques and standards, NEXT-proaudio, reserves the right to change the specifications of its products without early warning.
DANGER – HEARING DAMAGE NEXT-proaudio KUBIX systems are capable of producing extremely high sound pressure levels and should be used with care. Hearing loss is cumulative and can result from levels above 90dB if people are exposed for a long period.
• Precautions should be taken to prevent grounding failure or polarity switch. • It is advised to unplug the KUBIX unit during storms or when not in use for a long period of time. RIGGING AND SUSPENSION SAFETY CONSIDERATIONS KUBIX Series enclosures were designed for installation applications; it means that can be suspended by aid of the threaded inserts provided or using the recommended brackets.
NEXT Series - User Manual www.next-proaudio.com KUBIX FAMILY Spk. Model Freq. Resp. Dispersion Power Size 70Hz/100Hz K5/K5+ 5” 80º Conical 200W to 18kHz 59Hz to K8(A) 8” 100º Conical 500W 18kHz 44Hz to K12(A) 12” 80º Conical 700W 18kHz 37Hz to K10s(A) 10”...
PASSIVE SPEAKERS K5 / K5+ K5 is the smallest cabinet of KUBIX family. Available in two different passive versions, K5 and K5+, are the best solutions for small venues such as conference rooms, theatres, museums and restaurants. The K5 model is a full-range loudspeaker with a low frequency response beyond the 70Hz.
ACTIVE SPEAKERS All the KUBIX series cabinets were designed to achieve a simple to use and deploy versatile system. The ACTIVE units belonging to this series are qualified to be completely plug n’ play, featuring a power amplifier with DSP.
9- Power On/Off Switch 5- List of Available Presets Never operate KUBIX series Speakers in a way that maintains the Limiter Led consistently on. Capable of delivering very high power, the K12sA, is equipped with a 2 Channel Switched Mode Class D amplifier with DSP.
In the picture above are represented the different kind of wall mounting systems available; the speakers can be used either on horizontal or vertical orientation. All the KUBIX series cabinets are also ready to be suspended by mean of chains, only replacing the screw for an eye bolt. In the picture below are described the U-Bracket applications on a microphone stand or directly on the floor.
SPL with sound clarity is needed. It is also possible to operate the KUBIX series with other NEXT-proaudio models. On the image above is represented an HFA115s, from HFA Series, powering a K12. By simply laying the speaker on the top of the subwoofer it will automatically set a 15º...
If you need to disassemble any of this series loudspeaker, please follow the disassembly procedure described below. Do not attempt to service the KUBIX unit beyond what is described in this manual. All other service or repair of this product should be carried only by qualified personnel.
NEXT Series - User Manual www.next-proaudio.com K5(+) / K8(A) / K12(A) – Disassembly procedure Pre-requisite: 4mm hex bit 1. Carefully remove the front grille by simply pulling it from the enclosure, exposing the loudspeaker 2. Remove the loudspeaker’s screws with help of the hex bit 3.
5 years for the passive loudspeakers, and 2 years for all other products counting from the date of original purchase. The original receipt of purchase is mandatory for warranty validation purposes, and the product must have been bought from a NEXT- proaudio authorized dealer.