Page 1
Instruction Manual Model: E46PFO 46cm Pedestal Fan Distributed in Australia by: Honeyair Australia Pty Ltd. 78 Mallard Way, Cannington WA 6107 P 1300 710 860 F 1300 710 890 E info@gbi.com.au...
Page 2
1- GETTING TO KNOW YOUR PEDESTAL FAN Congratulations on the purchase of your new Excelair Pedestal Fan. Before first using your new Pedestal Fan, it is most important that you read and follow the instructions in this booklet, even if you feel you are familiar with this type of appliance.
Page 3
3-ASSEMBLY OF YOUR PEDESTAL FAN COLUMN ASSEMBLY INSTRUCTIONS Use the four screws provided (1) to join the main body to the base. Uninstall connecting plastic tube (3) and install base’s cover (2) to hide the screw of base’s (1 ) then twist the plastic tube Install fan trunk on bearing arc (if not installed), then install to the main body tube and insert the tightening screw.
Page 4
4- OPERATION OF YOUR PEDESTAL FAN TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. Loosen THE POSITION SCREW first and then tighten THE KNOB . Tilt fan head to the desired angle then firmly tighten THE POSITION SCREW first and then tighten THE KNOB.
Need help?
Do you have a question about the E46PFO and is the answer not in the manual?
Questions and answers