Page 4
Read all these instructions before attempting to operate this product and save these instructions. Check the voltage indicated on the rating plate. This tool is designed for a 220-240V/50Hz electric supply. Do not use electrical extension cord with this fan. ...
Page 5
Do not place the electrical cord under a cover. Do not overlay the cord but place the cord in an area where there are no risks to stumble over. The fan must always be unplugged when not operating. To unplug the fan, all the switches must be on the position ”OFF”, and then the plug could be disconnected.
1. TOWER FAN PARTS 1. Top control panel 2. FND Display 3. Front cover 4. Back cover 5. Grille 6. Column 7. Base 8. Remote control CAUTION: THIS FAN MUST OPERATE IN THE UPRIGHT POSITION ONLY. DO NOT LAY FAN ON ITS SIDE OR IN ANY OTHER POSITION. DOING SO MAY CAUSE DAMAGE TO THE FAN AND/OR PERSONAL PROPERTY.
2. ASSEMBLY INSTRUCTIONS Remove all items of packing from the tower fan. Pass the power cord through the middle of the two base pieces 3: Position base piece onto the support posts of the other base piece to create the base assembly. 4: Turn the tower body upside down, position the base assembly onto the pedestal tube.
3. OPERATING INSTRUCTIONS Use in a dry place, free of excessive humidity and water. This unit can be operated by the control panel on the fan or by remote control in the same manner. TOP CONTROL PANEL On/Off: Press this button to turn the fan on or off. Press it, product will start at low speed.
4. FND DISPLAY 1: Ion 2: Sleep wind 3: Natural wind 4: Room Temperature and Timer Display 5: Oscillation 6: Speed 5. GUIDELINES FOR USING THE REMOTE CONTROL The remote control must be pointed towards the receiver on the fan ...
6. GUIDELINES FOR USE OF BATTERIES If the remote control is not used for a long period of time, remove the batteries from the battery compartment. The remote control uses two AAA batteries, both of which should be new and replaced at the same time when they run out.
8. CLEANING INSTRUCTIONS 1. Always disconnect the cord from the electrical outlet before cleaning your fan. 2. Dust may be removed by using a vacuum cleaner along the back of the fan where the plastic grille covers the air intake. 3.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO FURTHER LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED.
Store the fan in a clean dry place when not in use. 11. WARRANTY The Excelair ETF45RI Tower Fan is under warranty for a period of 12 months from date of purchase. If unit is deemed to be faulty, please return to place of purchase and it will be replaced during the 12 month warranty period.
Need help?
Do you have a question about the ETF 45RI and is the answer not in the manual?
Questions and answers