1. Manuals
  2. Brands
  3. jobmate Manuals
  4. Rotary Hammer
  5. JM1000RHD
  6. Safety and operating manual

jobmate JM1000RHD Safety And Operating Manual

1000w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SAFETY AND OPERATING MANUAL
1000W
ROTARY HAMMER DRILL
JM1000RHD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM1000RHD and is the answer not in the manual?

Questions and answers

Summary of Contents for jobmate JM1000RHD

  • Page 1 SAFETY AND OPERATING MANUAL 1000W ROTARY HAMMER DRILL JM1000RHD...

  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL 3) Personal safety a) Stay alert, watch what you are doing and SAFETY WARNINGS use common sense when operating a power tool. Do not use a power tool while you are WARNING! Read all safety warnings and all tired or under the influence of drugs, alcohol instructions.
  • Page 3 SYMBOLS children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are To reduce the risk of injury, user must dangerous in the hands of untrained users. read instruction manual e) Maintain power tools.

  • Page 4: Component List

    COMPONENT LIST 1. Locking sleeve 2. Hammer and chisel action selector 3. Grease box cover 4. On/off Switch 5. Hammer and drilling action selector 6. Auxiliary Handle 7. Depth gauge 8. Grease box cover spanner 9. Dust cover 10. SDS Chisel bit x 2* (1 Flat chisel, 1 point chisel) 11.

  • Page 5: Technical Data

    ACCESSORIES Auxiliary handle Depth gauge Dust cover Spanner Plastic container grease SDS drill bits (8/10/12X150mm) SDS Chisel (flat & pointed 250mm) We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details.
  • Page 6 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for planing of firmly supported wooden materials, such as beams and boards. It is also suitable for beveling edges and rebating. Fig.A 1.
  • Page 7 Fig.D 2. Adjust the hammer and drilling action selector to position “ “. (See Fig. E) 3. You are now set up for hammer drilling into masonry. NOTE: Press the selector switch lock button before adjusting the dial selector everytime. 6.
  • Page 8 Fig.F2 7. CHISEL FUNCTION 1. Adjust the hammer and chisel action selector to position “ “. (See Fig. G1) 2. Adjust the hammer and drilling action selector to position “ “. (See Fig. G2) 3. You are now set up for chisel work using chisel action. NOTE: Press the selector switch lock button before adjusting the dial selector everytime.
  • Page 9 Fig.I 10. LUBRICATION MACHINE (SEE FIG. J) The machine is grease-lubricated. A grease refill is only required during hammer work efficiency is low. Open the grease box lid at the top of the hammer using the pin spanner provided. Then refill approx 30g grease provided with your tool.

  • Page 10: Working Hints For Your Tool

    WORKING HINTS FOR YOUR TOOL 1. Reduce the pressure on the drill bit when it is about to break through. This will prevent the drill from jamming. 2. When drilling a large hole, first drill a pilot hole using a smaller drill bit.

  • Page 11: Warranty

    WARRANTY This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be replaced free of charge with another of the same item.

Table of Contents