Subscribe to Our Youtube Channel
Related Manuals for Wise TSW800TP
Summary of Contents for Wise TSW800TP
- Page 1 Operation Manual IPTV Annex to TSW800TP Operation Manual Version: 4 Revision: 7 September/2010...
- Page 2 Wise Telecommuni- cations Industry. Wise Telecommunications Industry reserves the right to alter any of its products and manuals contents, without any prior notification, according to its own discretion. Wise Telecommunications Industry products are under constant development, some characteristics and functionality may not be included in the manuals during time of print;...
-
Page 3: Table Of Contents
Contents 1 Operation 2 IPTV Test Configuration 2.1 IPTV Tabs ........2.2 IPTV Test via Ethernet . -
Page 4: Operation
IPTV Operation The TSW800TP IPTV module has been developed to provide all of the required information for the installation, maintenance and troubleshooting of IPTV (Internet Protocol TV ) and VoD(Video on Demand ) services on xDSL lines. It verifies if the video stream is being sent by a IPTV or VoD server and performs several measurements to assesses the connection quality. -
Page 5: Iptv Test Configuration
Configuration and press START/STOP (Start/Stop keys may be used as an ENTER key as well) to configure how to obtain IP addresses (manual or automatic). If the TSW800TP MAC address is required to be the same of the STB MAC address, the configuration can be done in this screen also. - Page 6 Unicast MPEG2-TS/UDP: MPEG-2 TS packets are encapsulated into UDP/IP. Unicast MPEG2-TS/RTP: MPEG-2 TS packets are encapsulated inside RTP packets, which are encapsulated into UDP/IP. Unicast MPEG2-TS/RTP Brt: MPEG-2 TS packets are encapsulated inside RTP packets, which are encapsulated into UDP/IP (little-endian). Wise Telecommunications Industry...
-
Page 7: Iptv Test Application
F2 key (View), a pop-up menu gives access to many others screens. The description of each option is given below. Video Config Press #1 Key or select 1.Video Config and press START/STOP key to close pop-up menu and show the initial configuration screen. Wise Telecommunications Industry... - Page 8 IPTV IP results This screen shows received IP, Gateway IP, DNS server IP and the Subnet mask. Wise Telecommunications Industry...
- Page 9 Total bytes are also informed. F4 key (Stream) defines which stream will have its counters shown. Stream Rates This screen shows Kbps rates for different types of packets: video, audio, data and un- known. Wise Telecommunications Industry...
- Page 10 This parameter gives a hint of the minimum size of the buffer required at the next node. – MLR Represents the amount of media packages that are lost per second. Losses due to buffer overflow which occurs when there is network jam or when there are bad network Wise Telecommunications Industry...
- Page 11 – RTP OOS Registers the amount of RTP frames out of sequence when the protocol is MPEG-2 Broadcast (RTP). – RTP Discontinuity Registers the amount of RTP frames sequence breaks when the protocol is MPEG-2 Broadcast (RTP). Wise Telecommunications Industry...
- Page 12 Association Table), which is a table with each PMT (Program Map Table) PID. There is a PMT to each channel (program). This PMT is a table containing PIDs of video, audio and data packets of that channel. Wise Telecommunications Industry...
-
Page 13: Iptv Test Conclusion
Selecting the Save option, the test results may be saved into a file, as shown. With the following capabilities the TSW800TP is the right tool for properly deploying and managing IPTV services over xDSL lines.
Need help?
Do you have a question about the TSW800TP and is the answer not in the manual?
Questions and answers