Operation; Power On/Off - Quer KOM0825 Owner's Manual

Power supply:
1. Powered with built-in battery.
2. USB power supply.
II. OPERATION:

1. POWER ON/OFF

Before using this product please insert microSD card, all the files will be saved in
the microSD card;
Press and hold POWER BUTTON for 3 seconds to turn the device ON/OFF.
Note!
DVR will automatically turn on after plugging it charger, and turn off (with 10
seconds delay) after disconnecting it from charging.
To change mode, press MODE button repeatedly until you reach the desired
mode: RECORDING > CAMERA > PLAYBACK.
2. RECORDING
1. Press MODE button to switch to video mode.
2. Press OK button to start recording.
3. Press OK button again to stop recording and save the video file.
Recording settings:
• To enter Recording settings enable RECORDING mode on stand-by, and press
MENU button. Use
to enter / select option.
• Press MENU again to enter Setup options. Use
through options, and OK button to enter/select option.
• Press Menu button again to go back to RECORDING MODE.
3. CAMERA
1. Press MODE button to switch to photo mode.
1. Press OK button to take a picture.
Camera settings:
• To enter Camera settings enable CAMERA mode, and press MENU button. Use
or buttons to navigate through options, and OK button to enter / select option.
Owner's manual
buttons to navigate through options, and OK button
or
or buttons to navigate
EN
9