Advertisement
Quick Links
Advertisement
Summary of Contents for Mile Marker carolina
- Page 1 Mile Marker™ Installation Guide 2015...
- Page 2 Mile Marker – modular cabinetry and casework with the full facility in mind. Throughout installation process a full team of support members are available at Carolina. For assistance contact your Customer Service Representative at 800.763.0212 or visit www.carolinabusinessfurniture.com.
- Page 3 Important Notice: Installers are responsible for selecting and supplying appropriate fasteners and must verify the adequacy of the mounting hardware. Improper installation may cause damage or serious injury. Carolina cannot be held liable for damage or injury caused by incorrect mounting, assembly or use. These instructions are only a...
- Page 4 Mile Marker™ Installing Base Cabinet 1) Remove doors and drawers from cabinet. 2) Place cabinet in desired location level floor levels. 3) Drill pilot holes in back panel with 1/4” drill bit. 4) Install wall anchor (installers preference) using marks from pilot holes.
- Page 5 Mile Marker™ Installing Filler Panel provided material 1 1/2” screw 5) Place cabinet in position and anchor to wall. 7) After obtaining measurements unattach the cabinet from the wall. 6) Measure the gap between the cabinet and wall for filler panel.
- Page 6 Mile Marker™ Installing Work Surface provided materials 5/8” 1 1/4” 11) Measure for work surface 13) Cut work surface to the correct size from (step 11). 12) Attach (2) L-Brackets on back panel with 5/8” screws. 14) Place work surface on cabinet.
- Page 7 Mile Marker™ Attaching Side Splash 17) Add silicon or caulk to the side splash 18) Attach side splash by pressing it firmly to the wall. NOTE: Using circular beads will create a vacuum when applying side splash to wall to create a tighter seal.
- Page 8 Important Notice: Installers are responsible for selecting and supplying appropriate fasteners and must verify the adequacy of the mounting hardware. Improper installation may cause damage or serious injury. Carolina cannot be held liable for damage or injury caused by incorrect mounting, assembly or use. These instructions are only a...
- Page 9 Mile Marker™ Installing Upper Cabinet 1) Remove doors from cabinet. 2) Hold cabinet at desired location height. 3) Drill pilot holes in the back panel with 1/4” drill bit. 4) Install wall anchor (installer preference) using the marks.
- Page 10 Mile Marker™ Attaching Filler & Mounting Cabinet provided material 1 1/2” screw 5) Place cabinet in position on the wall and anchor. 7) After obtaining the measurements unattach the cabinet from wall. 6) Measure the gap between the cabinet and wall for filler panel.
- Page 11 Important Notice: Installers are responsible for selecting and supplying appropriate fasteners and must verify the adequacy of the mounting hardware. Improper installation may cause damage or serious injury. Carolina cannot be held liable for damage or injury caused by incorrect mounting, assembly or use. These instructions are only a...
- Page 12 Mile Marker™ Installing Storage Cabinet 1) Remove doors from cabinet. 2) Place cabinet in desired location and level it with the floor levelers. 3) Drill pilot holes in the back panel with 1/4” drill bit. 4) Install wall anchor (installer preference) using the marks...
- Page 13 Mile Marker™ Attaching Filler & Mounting Cabinet provided material 1 1/2” screw 5) Place cabinet in position on the wall and anchor. 7) After obtaining the measurements unattach the cabinet from wall. 6) Measure the gap between the cabinet and wall for filler panel.
- Page 14 Important Notice: Installers are responsible for selecting and supplying appropriate fasteners and must verify the adequacy of the mounting hardware. Improper installation may cause damage or serious injury. Carolina cannot be held liable for damage or injury caused by incorrect mounting, assembly or use. These instructions are only a...
- Page 15 Mile Marker™ Installing Raised Wall Panels 1) Measure the knife board from top of cabinet to bottom 2) Measure the height that the cabinet will hang. of lower knife boards. 3) Meaure down distance from (step 1). 4) Use a level to mark wall with a reference line from that distance.
- Page 16 Mile Marker™ Installing Raised Wall Panels 8) Place knife boards in position and anchor to wall. 9) Place panel in position on wall. 10) Remove front panel from cabinet. 12) Re-attach front panel to cabinet. 11) Anchor 1 1/2” screw through back panel into the bottom...
- Page 17 an OFS Brands company ™ P.O. Box 4398 Archdale, NC 27263 T 800-763-0212 F 336-431-9511 carolinabusinessfurniture.com...