ImmersionRC Vortex 150 Mini Getting Started Manual page 11

Following the Wizard
The wizard is used primarily to let the Vortex learn the flight channel order, and R/C Tx mode (1, 2, 3, 4).
'Left' refers to moving the stick left, and 'Back' refers to moving the stick back towards you.
Take your time with this step, if the wrong stick movements are fed to the wizard, it will be
difficult to navigate the OSD to complete the setup.
Follow the prompts,
ensuring that the correct
stick is moved each time.
As each control is
recognized, it's name will
appear to the left of the
servo bar.
Once the four primary
flight controls have been
learned, place the quad on
a flat and level surface and
move the right stick back.
This will calibrate the
accelerometer.
It is important that the
quad is level when this
step is performed, or the
auto-level flight modes will
not function correctly.
11