API A790 Operation Manual

Table of Contents

Quick Links

Download this manual

A790 Operation Manual

(April 2008)

Table of Contents

Need help?

Do you have a question about the A790 and is the answer not in the manual?

Questions and answers

Summary of Contents for API A790

Page 1 A790 Operation Manual (April 2008)
Page 2 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
Page 3 ® ENERGY STAR is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. ® Please reference ENERGY STAR related information from www.energystar.gov. As an ENERGY STAR® Partner, MiTAC Technology Corporation has ®...
Page 4 ® Over its lifetime, ENERGY STAR qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.
Page 5: Table Of Contents
Table of Contents Preface ..................v Notational Conventions............vi Chapter 1 Getting Started...........1-1 Getting the Computer Running ..........1-2 Unpacking ................ 1-2 Connecting to AC Power ..........1-2 Opening the Cover ............1-4 Turning On and Off the Computer........1-5 Taking a Look at the Computer..........1-6 Right-Side Components ...........
Page 6 Fn Key................2-7 Hot Keys ................2-7 Using the Touchpad ............. 2-9 Configuring the Touchpad ..........2-11 Using the Touchscreen (Optional) ........2-12 Using the Hard Disk Drive..........2-14 Replacing the Hard Disk Drive ........2-14 Using the Video Features ........... 2-18 Configuring the Display Modes ........
Page 7 Connecting an IR Device ............. 4-5 Connecting a USB Device............ 4-7 Connecting an IEEE 1394B Device ........4-8 Using PC Cards ..............4-9 Inserting and Removing a PC Card........4-9 System Memory Upgrade........... 4-11 Chapter 5 Setup Configuration Utility (SCU).....5-1 When and How to Use the SCU Program ......
Page 8 Chapter 8 Troubleshooting..........8-1 Preliminary Checklist ............8-2 Solving Common Problems..........8-3 Battery Problems.............. 8-4 Bluetooth Problems............8-4 Display Problems ............. 8-5 Hardware Device Problems..........8-6 Hard Disk Drive Problems ..........8-6 Infrared Problems............. 8-7 Keyboard, Mouse, and Touchpad Problems ....8-7 LAN Problems ..............
Page 9: Preface
Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters and 2 appendices. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.
Page 10: Notational Conventions
Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information that, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.
Page 11: Chapter 1 Getting Started
Chapter 1 CHAPTER Getting Started Congratulations on purchasing this computer. This high performance notebook computer is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure This chapter first tells you step by step how to get the computer up and running.
Page 12: Getting The Computer Running
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter (100~240 VAC, 50/60 Hz) −...
Page 13 NOTE: Power Supply Cord: (optional) Detachable, minimum 1.5 m long. Listed, rated minimum 125 V, 7 A, having a 2/18 AWG, type SVT flexible cord. One end terminates with a parallel blade, molded-on, attachments plug with a 7 A, 125 V (NEMA 1-15P) configuration;...
Page 14: Opening The Cover
CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack.
Page 15: Turning On And Off The Computer
Turning On and Off the Computer Turning On 1. Make sure the computer is connected to AC power. 2. Press the power button. 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows XP should start.
Page 16: Taking A Look At The Computer
Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not exactly be the same as those shown in this manual. Right-Side Components Component Description...
Page 17: Left-Side Components
Left-Side Components Component Description See Also Bay2 Slot May contain an extra battery pack or wireless modem (GPRS/GSM, CDMA) module. Supplies power to your computer when external P. 3-3 Battery Pack power is not connected. Getting Started...
Page 18: Rear Components
Rear Components Component Description See Also Connects the AC adapter. P. 1-2 Power Connector USB Ports Each of the two ports connects a USB device, P. 4-7 such as a USB floppy drive, flash disk, printer, digital camera, joystick, and more. For connecting to a Port Replicator / car mount Docking Port (both are available as an option).
Page 19 Component Description See Also Serial Port Connects a serial device, such as an external P. 4-4 modem. Locks the computer to a stationary object for P. 7-2 Kensington security. Lock Connects an IrDA-compliant device for wireless P. 4-5 IR Port data transfer.
Page 20: Front Components
Front Components Component Description See Also Top Cover Locks the top cover. P. 1-4 Latch Stereo Speaker Sends out sound and voice from the computer. P. 2-20 Handle Allows you to carry your computer for an easy grip. Getting Started 1-10...
Page 21: Top-Open Components
Top-open Components Component Description See Also Displays the output of the computer. P. 2-18 LCD Screen Can also have the optional touchscreen P. 2-12 function. Getting Started 1-11...
Page 22 Component Description See Also Device Show the current status of the computer’s devices. Indicators Scroll Lock indicator P. 2-4 Caps Lock indicator P. 2-4 Num Lock indicator P. 2-5 Hard disk drive in-use indicator P. 2-14 Battery charge indicator – P.
Page 23: Where To Go From Here
Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose… Do this… To know more about the computer… Go on to the next chapter. To install the operating system if your See the operating system manual.
Page 24: Chapter 2 Operating Your Computer
Chapter 2 CHAPTER Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.
Page 25: Starting And Stopping The Computer
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk;...
Page 26 To stop in Do this… To start up or this mode… resume again Hibernation Depending on your settings in Windows, Press the power you can place the computer in button. Hibernation mode by: • Closing the display cover. • Pressing the power button If you choose to stop in Standby or Hibernation mode, you can return to where you left off the next time you start up the computer.
Page 27: Using The Keyboard
Using the Keyboard NOTE: Your computer features backlight for your keyboard to help you see the keyboard keys during poor lighting conditions. Press Fn+F8 to turn it on/off (see Hot Keys later in this chapter). Your special shower-proof and dust-proof rubber keyboard has all the standard functions of a full-sized computer keyboard plus an added for specific functions.
Page 28: Cursor-Control Keys
Cursor-Control Keys NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:...
Page 29: Euro Symbol
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off.
Page 30: Fn Key
Fn Key key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold , then press the other key.
Page 31 Description Switches the optional keyboard backlight function on/off with 10 levels of brightness in-between. Switches the display output to one of the following when an external device is connected. Upon booting the system with CRT: LCD & CRT Upon booting the system with DVI: LCD &...
Page 32: Using The Touchpad
Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Page 33 Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double- Press and release the left button twice in quick succession. click –or–...
Page 34: Configuring The Touchpad
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.
Page 35: Using The Touchscreen (Optional)
Using the Touchscreen (Optional) CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. The touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Page 36 Term Action Drag and Press lightly on the touchscreen and move your finger drop until you reach your destination (drag). Finally, release your finger (drop) when you finish dragging your selection to the destination. The object will drop into the new location.
Page 37: Using The Hard Disk Drive
Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored.
Page 38 4. Remove the two screws securing the hard disk drive compartment. 5. Lift up the handle and pull on it to remove the hard disk drive compartment. Operating Your Computer 2-15...
Page 39 6. Remove the two screws securing the hard disk drive to the compartment and remove the steel plate cover. 7. Lift up the hard disk drive from the compartment and replace it with a new one. 8. Replace the steel plate cover and replace the two screws to secure the hard disk drive to the compartment.
Page 40 9. Replace the hard disk drive compartment to the computer and secure with two screws. 10. Replace the battery pack. Operating Your Computer 2-17...
Page 41: Using The Video Features
Using the Video Features The video subsystem of your computer features: 12.1/14.1-inch TFT (Thin-Film Transistor) color LCD display with 1024 768 XGA (eXtended Graphics Array) resolution, or × optional 14.1-inch TFT (Thin-Film Transistor) color LCD display with 1400 1050 SXGA+ / SXGA (Super eXtended Graphics Array) ×...
Page 42: Configuring The Display Modes
Configuring the Display Modes Your computer has been set to a default resolution and number of colors before shipment. You can view and change display settings through your operating system. See your operating system documentation or online help for specific information. For displaying in higher resolutions, you can connect an external CRT monitor that supports higher resolutions.
Page 43: Using The Audio Features
Using the Audio Features NOTE: To take advantage of the enhanced audio capabilities, the device driver supplied with your computer must be installed (see chapter 6 for details). If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: External audio connectors ( ) and A set of speakers ( )
Page 44: Connecting Audio Devices
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector ( ) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound.
Page 45: Using The Communication Features
Using the Communication Features Using the LAN NOTE: To take advantage of the LAN feature, the device driver supplied with your computer must be installed (see chapter 6 for details). The internal 10/100/1000Base-T Ethernet LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps.
Page 46: Using The Wireless Lan (Optional)
Using the Wireless LAN (Optional) Depending on your model, an internal Mini PCI wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes support...
Page 47: Connecting To A Wireless Network
2. Click Network and Internet Connections. 3. Click Network Connections, and then double-click the Wireless Network Connection icon. 4. Click Properties in the Wireless Network Connection Status dialog box. 5. You can configure your WLAN settings in the Wireless Network Connection Properties dialog box.
Page 48 4. If any wireless network is detected, the following window appears on screen. 5. Click to select a wireless network to connect to, and then click Connect. 6. Depending on the settings, you may be asked to enter a wireless security password (encryption key).
Page 49: Using The Modem
Using the Modem NOTE: To take advantage of the modem feature, the device driver supplied with your computer must be installed (see chapter 6 for details). The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.
Page 50: Using The Wireless Modem (Optional)
Using the Wireless Modem (Optional) NOTE: To take advantage of the wireless modem feature, the USB-to-COM driver supplied with your computer must be installed (see chapter 6 for details). Depending on your model, your computer includes an integrated GSM (Global System for Mobile Communications) / GPRS (General Packet Radio Service) feature.
Page 51: Using The Gps (Optional)
Connecting Using GPRS Your computer can receive General Packet Radio Services (GPRS), a high-speed data-only service that transmits data over a mobile telephone network. In addition, GPRS provides permanent on-line connection. To use GPRS, you must have a subscription to the function with a service provider that supports GPRS.
Page 52: Connecting To Another Bluetooth Device
Status Icon (blue with white logo). Connected (blue with green logo) You can use the Bluetooth Utility to configure Bluetooth connection settings and transfer files. Connecting to Another Bluetooth Device 1. Make sure that the target Bluetooth device is turned on, discoverable and within close range.
Page 53 3. The Add New Connection Wizard window appears. Select Express Mode (Recommended), then click on Next. 4. Select the device to connect to and click on Next. 5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information.
Page 54 Sending a File icon, and then click Wireless File Transfer. The 1. Right-click the following screen appears. 2. In the Wireless File Transfer window, click Add to browse for the file to send. The file(s) will show on the File/Folder window. 3.
Page 55 For detailed information on using the Bluetooth Utility, see the Bluetooth Utility Help on your computer by clicking on Help, then Help . . . Operating Your Computer 2-32...
Page 56: Chapter 3 Managing Power
Chapter 3 CHAPTER Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
Page 57: Ac Adapter
AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.
Page 58: Battery Pack
Battery Pack NOTE: The battery pack is not charged upon purchasing the computer. Make sure the computer is turned off and charge it for at least 8 hours before using it for the first time. Charging automatically starts when the AC adapter is plugged in to the computer. The Li-ion battery pack is the internal power source for the computer when the AC power is “Off”...
Page 59: Initializing The Battery Pack
To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator ( ) on the computer glows amber to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator glows green.
Page 60: Checking The Battery Level
3. Disconnect the AC adapter and leave the computer on until the battery is fully discharged. The computer will shut down automatically. 4. Connect the AC adapter to fully charge the battery pack. Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer.
Page 61 3. Remove the two screws securing the battery pack to the computer. 4. Lift up the handle and pull on it to slide the battery pack off the computer. 5. Slide the front panel off the battery pack and replace it on a new battery pack.
Page 62: Battery Low Signals And Actions
6. Slide the new battery pack into the computer. 7. Replace the two screws to secure the battery pack on the computer. Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10 % (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Charge Indicator ( ) blinks amber (orange) to alert you to take actions.
Page 63: Power Management
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows XP, power supply to different computer components is controlled on an as-needed basis.
Page 64: Hibernation
Hibernation NOTE: Make sure that the hibernation feature is enabled in the Hibernate tab of the Power Options Properties from the Control Panel in Windows XP. Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the system can be turned off.
Page 65: Power-Saving Tips
Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected.
Page 66: Chapter 4 Expanding Your Computer
Chapter 4 CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor Parallel device...
Page 67: Connecting An External Monitor
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.
Page 68: Connecting A Parallel Device
Connecting a Parallel Device Your computer has a parallel port for connecting a parallel device such as printer. The port supports ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes that turn the standard parallel port into a high-speed bi-directional peripheral port. Follow this procedure to connect a parallel device: 1.
Page 69: Connecting A Serial Device
Connecting a Serial Device Your computer has a serial port for connecting a serial device such as a serial mouse or modem. Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on. 2. Plug the device cable to the serial port on the rear of the computer. 3.
Page 70: Connecting An Ir Device
Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared- equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). When using the IR port of your computer to receive data: Place the transmitting device where its IR port faces the IR port of your computer within the effective range −...
Page 71 NOTE: During infrared communication, note the following: Do not move the computer and IR device. Do not enter Standby mode. Do not use a cell phone or another IR device near the computer. Avoid strong light such as sunlight or fluorescent light. Disable the screensaver.
Page 72: Connecting A Usb Device
Connecting a USB Device Your computer has two USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. To connect a USB device, simply plug the device cable to one of the USB ports.
Page 73: Connecting An Ieee 1394B Device
Connecting an IEEE 1394B Device NOTE: To connect an IEEE 1394A (also known as FireWire 400) device to the computer’s IEEE 1394B (also known as FireWire 800) port, you need an optional FireWire 800/FireWire 400 bilingual cable. Your computer has an IEEE 1394B port for connecting IEEE 1394B devices.
Page 74: Using Pc Cards
Using PC Cards Your computer has a PC card slot that can accommodate two type II cards or a type III card that supports CardBus specifications. Type II cards are typically used for I/O devices such as data/fax modems, LANs, and mass storage devices.
Page 75 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click the Safely Remove Hardware icon on the taskbar and the Safely Remove Hardware window appears on screen.
Page 76: System Memory Upgrade
System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin DDR2 SO-DIMM slots. However, to avoid damage during the installation procedure, please ask your dealer for help. Expanding Your Computer 4-11...
Page 77: Chapter 5 Setup Configuration Utility (Scu)
Chapter 5 CHAPTER Setup Configuration Utility (SCU) SCU is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.
Page 78: When And How To Use The Scu Program
When and How to Use the SCU Program When to Use You need to run the SCU program when: You see an error message on the screen requesting you to run Setup. You want to restore the factory default settings. You want to modify some specific settings according to the hardware.
Page 79 The SCU menu can be divided into four areas: On the top is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The center column of the menu displays the current configuration information of the system, devices, and memory items.
Page 80: Moving Around And Making Selections
Moving Around and Making Selections In most cases, you must go through two levels to complete the setting for an item: menu title and submenu. Use the keyboard to move around and make selections. A brief description of keyboard usage is listed next: Function ←...
Page 81: Main Menu
Main Menu The Main menu contains the system date and time as well as the IDE/ SATA interface setting of the system. System Time sets the system time. System Date sets the system date. IDE Channel 0 Master/Slave / SATA Port 1/2 upon pressing Enter the following screen appears: Setup...
Page 82 Type sets the type of storage device installed. The options are User, Auto, CD-ROM, ATAPI Removable, None, IDE Removable, and Other ATAPI. Multi-Sector Transfers specifies the number of sectors per block for multiple sector transfers. The options are 16 Sectors, 8 Sectors, 4 Sectors, 2 Sectors, and Disabled.
Page 83: Advanced Menu
Advanced Menu The Advanced menu contains the advanced settings. Serial/Parallel Port Configuration upon pressing Enter the following screen appears. Serial Port A/B/C/D enables the serial port. Setup...
Page 84 Parallel Port enables the parallel port. Mode sets the mode. The options are FIR, IrDA, Serial Port C, Touchscreen., ECP, EPP, Bi-directional, and Output Only, Base I/O Address sets the base input/output address. DMA Channel sets the DMA channel for the IR port. This item only appears when the above item is set at FIR.
Page 85: Security Menu
Security Menu The Security menu contains the security as well as the TPM (Trusted Platform Module) setting. Supervisor/User Password Is shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User Password sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press .
Page 86 Password on Boot enables the system to require a password upon boot-up. TPM Support enables TPM support. TPM is a component on your computer’s mainboard that is specifically designed to enhance platform security above-and-beyond the capabilities of today’s software by providing a protected space for key operations and other security critical tasks.
Page 87: Boot Menu
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a boot device from which to load the operating system.
Page 88: Exit Menu
Exit Menu The Exit menu displays ways of exiting the SCU program. After finishing with your settings, you must save and exit so that the changes can take effect. Exit Saving Changes saves the changes you have made and exits SCU Setup Utility.
Page 89: Chapter 6 Installing Software Drivers
Chapter 6 CHAPTER Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the disc supplied with your computer.
Page 90: How To Use The Driver Disc
How to Use the Driver Disc NOTE: • The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. • You can always find README or document files on the driver disc. These files contain the latest information from the software supplier.
Page 91 User Guide Upon clicking on this on the first page, allows you to view the Operation Manual on screen. NOTE: You need Adobe Acrobat Reader to open the manual file supplied on this driver disc. Install the Adobe Acrobat Reader program if you do not have it on your computer by clicking on Adobe Reader.
Page 92 Device Driver Ensures the full function of the following drivers. Install this main driver before installing the other drivers. Upon clicking this button, the chipset, VGA, audio, modem, and LAN drivers would be installed one after the other. PROSet Installs the WLAN driver that allows your system to connect wirelessly to the Internet.
Page 93 Bay2 Driver Allows you to use an extra battery pack or wireless modem (GPRS/GSM, CDMA) module on the Bay2 slot. Driver on the Second Page Installing Software Drivers...
Page 94 Vehicle Dock Upon clicking this button on the second page, the following screen appears. Video Capture Allows you to connect a video capture device through (option) the AV input port. USB-to-COM Allows you to use the wireless modem and GPS (option) features to transmit information wirelessly.
Page 95 Upon clicking on this, the instructions for installing the GPS driver appears (refer to the next section for further instructions). Driver on the Third Page Upon clicking on Next Page, the following screen appears. Installing Software Drivers...
Page 96 Hotfix Upon clicking this button on the third page, the following screen appears. KB896256 Install this update to fix a situation where your Windows-based system that supports processor power management features, and is equipped with multiple processors, may experience decreased performance. After you install this item, you may have to restart your computer.
Page 97 KB908673 Install this update to fix a situation where problems may occur when you try to transfer files to or from a device that is connected to a USB 2.0 hub. KB894391 Install this update to address an issue that may cause a "Generic Host Process"...
Page 98: Touchscreen Driver
Battery Upon clicking this button on the third page, the Calibration following screen appears. Utility Installs the battery pack automatic calibration utility that includes the Battery Monitor and Battery Learning programs. Help Displays the instructions for performing a battery calibration. Touchscreen Driver To install the touch screen driver, perform the following: 1.
Page 99 3. When finished installing, select Yes to reboot your system. The driver should now be loaded. 4. After the system has finished rebooting, click on the PenMount Monitor icon located on the taskbar to bring up the PenMount Control Panel. 5.
Page 100: Gps Driver
GPS Driver To install the GPS driver, perform the following: 1. Insert the driver disc into the optical drive. 2. Click Start Run. 3. Enter the driver path and file name (e.g., g:\GPS\PL-2303 Driver Installer_GPS.exe), then click OK. 4. When the InstallShield Wizard screen appears, click Next to continue. 5.
Page 101: Using The Osd
Using the OSD NOTE: The OSD utility is an option for you. You can decide whether you would like to have this utility installed. With the OSD utility installed, the utility will be activated and an icon will appear on the system tray every time Windows starts up. A graphic display will appear on the screen to indicate the current status of certain operations (as listed next).
Page 102 Icon OSD Description Hot Key/Button Operation Icon appears on the screen to indicate that AC power cord has been connected or unplugged. The OSD disappears after a few seconds. AC In AC out Exiting and Reactivating the OSD Utility To exit the OSD utility, right-click on the OSD utility icon on Windows system tray and click on “Exit.”...
Page 103: Chapter 7 Caring For The Computer
Chapter 7 CHAPTER Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...
Page 104: Protecting The Computer
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use.
Page 105: Using An Anti-Virus Strategy
Using an Anti-Virus Strategy New viruses are always being developed nowadays and they are attacking computers even more easily with emails so commonly used worldwide. You can also install a virus-detecting program to monitor potential viruses that could damage your files. Caring for the Computer...
Page 106: Taking Care Of The Computer
Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 0 °C (32 °F) and 60 °C (140 °F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.
Page 107: Cleaning Guidelines
Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.
Page 108: When Traveling
When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed.
Page 109: Chapter 8 Troubleshooting
Chapter 8 CHAPTER Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Page 110: Preliminary Checklist
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.
Page 111: Solving Common Problems
Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 Bluetooth Problems P. 8-4 Display Problems P. 8-5 Hardware Device Problems P. 8-6 Hard Disk Drive Problems P. 8-6 Infrared Problems P.
Page 112: Battery Problems
Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly.
Page 113: Display Problems
I cannot end a Bluetooth connection. If another device is connected to your computer, you can either end the connection using the other device or by deactivating Bluetooth. Display Problems Nothing appears on the screen. If the power-on indicator is not on, check the electrical outlet, the plugs and power cords.
Page 114: Hardware Device Problems
The external monitor displays nothing. Make sure that the monitor is turned on. Make sure that the monitor’s signal cable is properly connected. Switch the display to the monitor by pressing the hot key or change the display through the settings in Display Properties. Simultaneous display/multi-display does not work.
Page 115: Infrared Problems
The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. The hard disk drive in-use indicator glows without blinking. The data files stored on the hard disk drive may be fragmented.
Page 116: Lan Problems
The numeric keypad is disabled. Make sure that the is switched on. (Check if the Num Lock Num Lock Indicator glows or not.) The external keyboard does not work. Make sure that the keyboard cable is properly connected. The USB mouse does not work. Make sure that the mouse cable is properly connected.
Page 117 Transmission quality is poor. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem as described next. Radio interference exists.
Page 118: Modem Problems
Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the necessary driver(s) is correctly installed. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.
Page 119: Power Management Problems
Power Management Problems The computer does not enter Standby or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use. Make sure that the Standby or Hibernation time-out is enabled. The computer does not enter Standby or Hibernation mode immediately.
Page 120: Software Problems
Make sure that the printer driver is correctly installed. Make sure that you have assigned the printer port correctly in your operating system or application program. The printer prints garbled information. Make sure that the printer driver is correctly installed. Make sure that the printer cable is properly connected.
Page 121: Startup Problems
The sound system does not record. Adjust the playback or recording sound levels. The external microphone or audio device does not work. Make sure that the microphone is connected to the proper connector on the computer. Make sure that your computer is equipped with the driver needed. Click the speaker symbol on the taskbar and check the Windows volume control.
Page 122: Resetting The Computer
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data.
Page 123: Appendix A Specifications
Appendix A APPENDIX Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel Yonah processor (processor no. x48), µFC-BGA package, dual core low voltage, 1.66 GHz; Front Side Bus (FSB) 667 MHz, 15 W thermal ceiling Core logic Intel 945GM (Calistoga) chipset + ICM7-M Cache memory...
Page 124 Parts Specifications Hard disk drive (removable) 2.5-inch, 9.5 mm height, Ultra DMA 100 / SATA 160 (option) support, built-in G-sensor and heater for low temperature –20 °C (option) I/O ports Serial port, parallel port, IEEE 1394B port, two USB ports, IR port, port replicator, RJ-45 port, RJ-11 port, fingerprint sensor (option) Communications Modem...
Page 125: Appendix B Regulatory Information
Appendix B APPENDIX Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix.
Page 126: On The Use Of The System
On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 127: Safety Notices
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Page 128 ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.
Page 129: About The Modem
About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.
Page 130: On The Use Of The Rf Device
On the Use of the RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 131 The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
Page 132 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.
Page 133: European Union Ce Marking And Compliance Notices
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
Page 134 Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
Page 135 General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “How to Turn Off the Wireless LAN Radio.”...
Page 136 Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.
Page 137: 电子信息产品有毒有害物质或元素名称及含量标示
电子信息产品有毒有害物质或元素名称及含量标示有毒有害物质或元素项目部件名称铅镉汞六价铬多溴联苯多溴二苯醚 (Pb) (Cd) (Hg) (Cr+6) (PBB) (PBDE) 金属机构件塑料机构件电路板组件液晶面板硬盘光驱键盘充电电池组件适配器电源线外部信号连接线钮扣电池风扇散热模块 (金属部分) 喇叭 O : 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 X : 表示该有害物质至少在该部件的某一均质材料中的含量超出...
Page 138 使用除外项目如下： 1. 铅使用于部件、装置的内部连接用高融点锡焊上（铅为 85wt% 以上的有铅锡焊）。 2. 电子陶瓷部件（压电组件・陶瓷介质材料等）内的含铅量。 3. 电子部件的玻璃内的含铅量。 4. 两种以上元素组成之焊料，用于连接微处理器封装与针头且铅含量超过 80wt% 并少于 85wt%。 5. 铅于覆晶集成电路封装内用于铸模与基板之电子接点之焊锡。 6. 于钢材、铝材、铜材中的含铅量。 7. 通孔盘状及平面数组陶瓷多层电容器焊料所含的铅。 8. 电子接点的电镀，其要求高可靠性，且没有替代性材料之镉。 9. 电池内的含铅量。 10. 电池内的含镉量。 11. 使用于钮扣电池之含汞量。 Regulatory Information B-14...

API A790 Operation Manual

Preface

Chapter 1 Getting Started

Chapter 2 Operating Your Computer

Chapter 3 Managing Power

Chapter 4 Expanding Your Computer

Chapter 5 Setup Configuration Utility (SCU)

Chapter 6 Installing Software Drivers

Chapter 7 Caring for the Computer

Chapter 8 Troubleshooting

Appendix A Specifications

Appendix B Regulatory Information

Quick Links

Need help?

Questions and answers

Summary of Contents for API A790

Table of Contents