Cassette Recorder - Philips AZ 1500 User Manual

CD PLAYER
3. Repeat steps 1-2 to select and store all desired
tracks.
™ Display: FULL if you try to program more
than 20 tracks.
Reviewing the program
In the stop position, press and hold PROGRAM until
the display shows all your stored track numbers in
sequence.
Erasing a program
You can erase the program by:
• pressing 9 twice
™ CLr is displayed briefly and PROG
disappears.
• You select TAPE or RADIO function.

CASSETTE RECORDER

Cassette playback
1. Adjust the POWER slider to TAPE.
2. Insert a cassette as shown and close the door.
3. Press 2 to start playback.
™ Display: shows tAPE throughout tape
operation.
4. To pause playback press PAUSE ;. Press again to
resume.
5. Press SEARCH 5 or 6 to fast wind the tape.
6. To stop the tape, press STOP 9.
The keys are automatically released at the end of a
tape and the set switched off, except if PAUSE ; has
been activated.
General information on recording
• Recording is permissible insofar as copyright or.
other rights of third parties are not infringed.
• For recording, use only NORMAL type cassettes
(IEC type I) on which the tabs have not yet been
broken. This deck is not suited for recording on
CHROME (IEC II) or METAL (IEC IV) type
cassettes.
• The best recording level is set automatically.
Altering the VOLUME or DBB controls will not
affect the recording.
CASSETTE RECORDER
• To protect a tape from accidental erasure, break
out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape.
CD Synchro Start Recording
1. Adjust the POWER slider to CD.
2. Insert a CD and if desired, program track numbers.
3. Insert a suitable tape into the cassette deck and
close the door.
4. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically
from the beginning of the program. You don't
need to start the CD player separately.
™ To select and record a particular passage
within a CD track:
• Press SEARCH ∞ or §. Release the control when
you recognize the passage you want.
• To pause CD playback, press 2;.
• Recording starts from this exact point in the track
when you press RECORD 0.
5. To pause recording, press PAUSE ;. Press
PAUSE ; again to resume recording.
6. To stop recording, press STOP 9.
Recording from the Radio
1. Tune to the desired radio station (see Tuning to
radio stations).
2. Follow steps 3-6, under CD Synchro Start
Recording.