Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Air Aroma Aroslim
- Page 1 Designed by Air Aroma...
- Page 2 English Aroslim setup guide...
- Page 3 Alterna- tively, an external timer can be used to switch off the Aroslim® automatically. 8. Always keep the Aroslim® in a vertical position if the bottle is in place. The bottle can run empty through the silencer.
- Page 4 2. Remove the DC power adaptor and the Adaptor plug plates (1), and then remove the top poly-foam (2) to expose the Aroslim® pole. 3. Carefully lift the Aroslim® out of the box, ensuring to place the Aroslim® top piece (3) on the top of the pole.
- Page 5 Set up of the Aroslim® 1. To insert a 250ml bottle of Air Aroma essential oil or aroma oil, lift the top piece (1) of the Aroslim®. 2. Screw the bottle (2) into the diffuser. Make sure the thread is correctly aligned (do not over-tighten).
- Page 6 Function of the Aroslim® 1. The strength of the Aroslim® can be adjusted by pressing the button (1) on the pole. 2. The Aroslim® is in stand-by mode when the red light is on. 3. By pressing the button (1) for 5 seconds the LED will shine brighter. Then you will be able to change the strength settings.
- Page 7 1. Set the code to the current code (by default this is 1111) 2. Insert a pen or pin into the hole at the right side of the Aroslim® Security Lock. 3. Push and hold the pen or pin in the hole to change the code.
- Page 8 Copyright © Air Aroma International Pty. Ltd. All rights reserved. The Air Aroma and Aroslim logo are registered trademarks of Air Aroma Research Pty. Ltd.
Need help?
Do you have a question about the Aroslim and is the answer not in the manual?
Questions and answers