User Guide Night-View Light Sensor Power Microphone Lens Night-View LEDs On back: Antenna RESET AC Port Wall Mount Hole Sync ™ Internet Viewable Camera For use with: AT&T Smart Sync™ Smart Sync Monitor 5” Internet Viewable Touch Mobile App on iPhone and Screen Video Monitor Android smartphones Model Number: 05010...
Welcome to your Smart Sync Wi-Fi Camera The Smart Sync Wi-Fi Camera connects to the: Smart Sync 5” Touch Screen Video Monitor (05010) as an additional camera; allowing you to easily monitor multiple rooms or children. Up to 4 total cameras can be connected. Smart Sync Monitor Mobile App, available for iPhone and Android smartphones, letting you enjoy remote viewing and easy access to all of baby’s important data.
Page 3
Getting Started (continued) 2. Then tap Connect a New Camera. 3. Follow the onscreen instructions to power on the camera. Tap Next. 4. Enter your camera’s unique serial number found on the bottom of the camera. Tap Next. 5. Then enter a name for this camera, such as: John’s Playroom.
Getting Started (continued) Select Cameras If more than one camera is connected to your Smart Sync Monitor, you can utilize the Select Cameras function; allowing you to manually toggle between cameras and select Auto Split Screen or Scan mode. The Select Camera function can be accessed from in the upper left corner of the video feed; or in Settings > Camera. Selecting a camera Tap the Select Camera button.
Page 5
Getting Started (continued) Deleting a Camera: Smart Sync 5” Internet Viewable Touch Screen Video Monitor To delete (unpair) a camera from your Smart Sync Monitor, tap Settings in the Main Menu, then tap Camera. Select the camera that you wish to delete, then tap the Trash icon.
Page 6
Getting Started (continued) Adding new Camera: Smart Sync Monitor Mobile App You can connect up to four cameras. To add a camera from your Smart Sync Monitor Mobile App, tap Settings in the Main Menu, Camera, then Connect a new Camera.” Follow the onscreen instructions.
Placing your Camera Placement Be conscious of the ambient light and noise where you place the camera. Test the video and sound quality from a few locations before deciding on the final spot. Place the camera on a flat surface, such as a table, dresser top, or shelf. Face the camera lens towards what you want to see. The camera’s cord must be more than 3 feet away from the reach of children.
Placing your Camera (continued) Wall Mounting the Camera To mount the camera to a wall or other vertical surface, you will need the following: Tools (not included) Parts • Drill • Drywall Anchor • 1/4 inch Drill Bit (for drywall) •...
Troubleshooting Resetting the Camera While the camera is plugged in, hold the Reset button on back of the camera. Hold until the LED light blinks (normally 6-8 seconds). The LED turns orange; wait approximately 40 seconds until the LED turns red again. The camera is in pairing mode again.
Important Safety Instructions CAUTION: Keep small parts out of the reach of children. To prevent cord entanglement and strangulation: • Do not place the camera or AC power adapter within reach of children. • Do not place the camera or AC power adapter in, or attach to, a crib or playpen. •...
Warranty Baby Monitor & Accessory Limited Warranty The AT&T brands are used under license. Thank you for purchasing this AT&T branded product manufactured under license by Baby’s Journey, Inc. (“Baby’s Journey”). Any repair, replacement, or warranty service, and all questions about this AT&T branded product should be directed to Baby’s Journey;...
Warranty (continued) Warranty Exclusions (continued) Use of Non-AT&T branded Products and Accessories. Defects or damage that result from the use of Non-AT&T branded or certified products or accessories or other peripheral equipment, are excluded. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than AT&T, Baby’s Journey or its authorized service centers, are excluded from coverage.
Need help?
Do you have a question about the sync 05030 and is the answer not in the manual?
Questions and answers