AOC e2040S Service Manual page 54

20" LCD Color Monitor AOC e2040S
Note: After installation, you must restart the PC to take the setup to effect.
Step4：CHECK Software Version：
1. Set resolution optimum resolution， Screen is 48 gray-scale,，keep to pressing "MENU" button, AC ON/OFF.
2. Press "MENU" button again, choose"F" ，as follow picture:
PS: Different model into the factory model method is not the same,
Relevant model how to enter the factory model, please reference service manual!
3. Press "MENU" button, Select the "F" in OSD, press "Menu" key to Enter "F",enter into the factory mode，it will
show as the follow picture，If FW version "V005" is displayed in red rectangle as the follow picture, it means Burn In
successful. as follow picture:
PS: Different model firmware version is not the same,
4. Choose "AUTO COLOR/LEVEL",PC will switch to the gray-scale screen，press "MENU" button again， Show
"PASS" to express "AUTO COLOR" OK,as follow picture:
54