Table of Contents
Advertisement
Quick Links
Ellery
3-in-1 Convertible Crib
Adaptable as Your Child Grows Up
Adult assembly required due to the presence of small parts, sharp points & sharp edges.
Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction
manual for future reference.
Our goal is to improve the assembly process for the customer.
If you have any questions during assembly or you are missing parts
Do not return product parts to the retailer before contacting our customer service department for assistance.
Please follow contact instructions on page 9.
Assembly Instruction Manual
Advertisement
Table of Contents
Related Manuals for Lolly & Me Ellery
Summary of Contents for Lolly & Me Ellery
- Page 1 Ellery 3-in-1 Convertible Crib Adaptable as Your Child Grows Up Adult assembly required due to the presence of small parts, sharp points & sharp edges. Before assembly, read these instructions. Make sure all pre-assembled parts are tight. Store this instruction manual for future reference.
- Page 2 Crib Warnings Failure to follow these warnings and the assembly instructions could result in serious injury or death. Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE . DO NOT use this crib if the instructions can not be strictly followed. Infants can suffocate on soft bedding.
- Page 3 Toddler Bed Warnings Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child. The mattress intended for use on the bed shall be a full-size crib mattress having minimum dimensions of 51 5/8 in.
- Page 4 Congratulations on Your Purchase! Thank you for choosing a Lolly & Me product. Don’t worry about the assembly. Inside you will find understandable step- by-step instructions with clear illustrations—it’ll be a piece of cake! If you get stuck, ring us up at 1-800-515-4056. Need a replacement part or is a part missing? Just call us and we’ll get one sent off to you right away.
- Page 5 Instructions for Assembly Ellery 3-in-1 Convertible Crib Adaptable as Your Child Grows Up Let’s Put This Baby Together! Adult assembly required due to the presence of small parts, sharp points,and sharp edges. Before assembly, read these instructions. Make sure all preassembled parts are tight and that all neccessary hardware is included.
- Page 6 Parts Crib Side (x2) Left & Right End (x2) Toddler Bottom Rail (x1) Toddler Rail (x1) Mattress Base (x1)
- Page 7 Hardware M6x55mm Bolt (x8) M6x16mm Bolt (x4) M6x44mm Bolt (x3) Dowel (x2) “ ” L e l l “ ” S e l l...
- Page 8 STOP IF YOU EXPERIENCE ANY ISSUES WITH THIS PRODUCT BEFORE YOU RETURN THIS TO THE RETAILER PLEASE FOLLOW THE PROCEDURES LISTED ON THE FOLLOWING PAGE...
- Page 9 PRODUCT ASSITANCE PROCEDURES IF YOU HAVE ANY QUESTIONS DURING ASSEMBLY OR YOU ARE MISSING PARTS, PLEASE CONTACT US DIRECTLY. PROCEDURES TO FOLLOW SHOULD YOU HAVE ANY QUESTIONS: FOR THE BEST AND MOST TIMELY SERVICE PLEASE CONTACT US VIA E-mail:customerservice@lollyandme.com phone us at 1-800-515-4056 or write to 10301 Bren Road West, # 0-379 Minnetonka, MN 55343 PLEASE PROVIDE THE FOLLOWING INFORMATION IN YOUR E-mail.
- Page 10 Parts Needed: "L" Allen Wrench Left & Right End (x2) Crib Side (x1) "S" Allen Wrench M6x55mm Bolt (x4) Crib Assembly Attach 2pcs Left & Right End (A) to Crib Side (B) using 4pcs Bolts (aa). Continue to Step 2...
- Page 11 Parts Needed: Mattress Base (x1) Crib Assembly Warning Envelope Figure 1 Rotate out four mattress brackets Figure 2 (one on each end) on (1) Mattress Base (E) as shown (see Figure 1) before attaching to Crib Assembly. Then attach Instruction Envelope (see Figure 2).
- Page 12 Parts Needed: "L" Allen Wrench Mattress Base (x1) "S" Allen Wrench M6x16mm Bolt (x4) Crib Assembly x4 on this bolt assembly zoom Attach Mattress Base (E) to Crib using 4pcs Bolts (bb). Continue to Step 4...
- Page 13 Parts Needed: "L" Allen Wrench Crib Side (x1) "S" Allen Wrench M6x55mm Bolt (x4) Crib Assembly Attach Crib Side (B) to Right and Left Crib End using 4pcs Bolts (aa). Continue to Step 5...
- Page 14 Crib Assembly Please note that there are 3 different heights to adjust the mattress support as your baby grows. Place newborns and non-sitting babies on mattresses positioned on the highest mattress support position. (top hole) Once a baby is sitting up, adjust the mattress to the second position so that the baby is lower than the crib railing.
- Page 15 Parts Needed: "L" Allen Wrench "S" Allen Wrench Toddler Bed Assembly Remove 4pcs Bolts (aa) and the Front Side (B) from Crib Assembly as shown. Continue to Step 7..
- Page 16 Parts Needed: "L" Allen Wrench Toddler Bottom Rail (x1) Toddler Rail (x1) "S" Allen Wrench M6x44mm Bolt (x2) Toddler Bed Assembly Attach Toddler Rail (D) to Toddler Bottom Rail (C) using 2pcs Bolts (cc). Continue to Step 8...
- Page 17 Parts Needed: M6x44mm Bolt (x1) Dowel (x2) Dowel (x2) "L" Allen Wrench "S" Allen Wrench Toddler Rail (x1) M6x55mm Bolt (x2) Toddler Bed Assembly Attach Toddler Rail to Crib using 2pcs Bolts (aa) and 1pcs Bolt (cc) and 2pcs Dowels (dd). The Lolly&Me toddler rail allows our customer greater flexibilty in usage as rail can be attached at the head of the bed or at the foot.
- Page 18 Parts Needed: "L" Allen Wrench "S" Allen Wrench Day Bed Assembly Remove 3pcs Bolts (cc) and the Toddler Rail (D) from Crib Assembly as shown. Continue to Step 10...
- Page 19 Day Bed Continue to Step 11..
- Page 20 Parts Needed: Storing Instruction Manual After unit is assembled, use the following instructions to keep instruction manual for future use. 1. Pick up instruction manual. 2. Fold instruction manual in half. 3. Slide instruction manual into warning envelope attached to mattress base assembly.
- Page 21 base...
- Page 22 1-800-515-4056 E-mail: customerservice@lollyandme.com...