Page 1
OPERATING MANUAL Before attempting to connect or operate this product, please read these nstructions completely OKIUSA Standard Camera 1/3” SONY Super HAD CCD Model SST-6420 12V DC Model SST-6420D 12V DC + 24V AC Model SST-6420P 85 ~ 265V AC 1.
BL COFF SUPAG C AT W D C 12V SST-6420 C(CS)mount adapter If a CS mount lens is to be used, remove the C mount ring. DC lever Adjuster(VR) For DC drive auto iris lens driving level adjustment; in order to obtain correct exposure light.
Page 3
4.Driving coil(-) Connect the leads as shown above; refer to the instructions of the lens. 3.2 Power Terminal 3.2.1 DC 12V SST-6420 model D C 12 V Connect the power supply to the power-input terminal as shown is the figure right 1.Power for the camera is 12VCD±10%, connector “DC 12V”...
Page 4
4. DIP SW function 4.1 Flickerless mode If you use flickerless function, in this mode, the shutter speed is fixed to 1/100 sec for NTSC system and 1/120 sec for PAL system to reduce the flicker of fluorescent lights. Better for Japan FLOFF FLON FLOFF...
Page 5
4.5.2 AWB mode-- Conventional auto white balance set the DIP SW to AWB position. In this case, operation is performed at a faster operating speed than ATW mode. 5. Cautions: 5.1. Never point the camera toward the sun Do not epose the lens directly to the sun or to strong light as this may damage the pick-ip device.
85 ~ 265V AC Synchronization Internal Horizontal Resolution 420 TV Lines Image Device 1/3” SONY Super HAD CCD Picture Elements PAL: 500 x 582, NTSC: 512 x 492 Scanning System PAL: 625 lines, NTSC: 525 lines, 2:1 interlace Min. Illumination 0.8 Lux @F1.2...