Privacy Key Lock - SoftBank 824p User Manual

PIN Lock & Cancellation (PUK)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is
incorrectly entered three times. Cancel PIN Lock or PIN2
Lock by entering Personal Unblocking Key (PUK/PUK2).
◦
For information about PUK/PUK2, contact SoftBank Customer Center,
General Information ( P.18-32).
◦
Emergency Numbers (110, 119, 118) can be dialed even in PUK/PUK2
entry window.
1
In PIN lock mode, enter PUK/PUK2
2
Enter new PIN/PIN2
3
Reenter new PIN/PIN2
Note
◦
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. (Even turning off power is counted as one incorrect
entry.) Write down PUK.
◦
For procedures required to unlock USIM Card, contact SoftBank
Customer Center, General Information ( P.18-32).

Privacy Key Lock

Set Privacy Key Lock to require Phone Password for using
824P except for turning ON/OFF and answering calls.
Main Menu  Settings

1
Enter Phone Password
When Privacy Key Lock is set, appears in Standby.
◦
To cancel Privacy Key Lock, enter Phone Password in Standby. If
Phone Password is incorrectly entered five times, 824P turns off.
While Privacy Key Lock is Active
◦
Emergency numbers (110, 119, 118) are dialable even when Privacy
Key Lock is active.
◦
Only phone numbers appear on display for incoming calls.
◦
Message ringtones or Alarm tones are disabled.
◦
Calendar event tone or Alarm is disabled.
◦
The following do not appear in Standby while Privacy Key Lock is set.
・
Event Indicators
・
Main Display icons
・
Shortcut icons
・
S! Quick News
◦
The following functions ( P.11-6) are disabled:
・
Reject Unknown
・
Call Rejection and Call Acceptance (Restrictions)
Note
◦
Turning off power cannot cancel Privacy Key Lock.
<Default> OFF
Security Privacy Key Lock

11
11-3