Advertisement
Advertisement
Related Manuals for Power Fist 8142564
Summary of Contents for Power Fist 8142564
- Page 1 8142564 2,800 Watt Generator Owner’s Manual...
-
Page 2: Safety Guidelines
Introduction WARNING! READ AND UNDERSTAND ALL SAFETY PRECAUTIONS IN THIS MANUAL BEFORE OPERATING. FAILURE TO COMPLY WITH INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE. • This product is for use in a consumer application (personal, residential or household usage) Use reasonable care in the operation and maintenance of the product as described in the owner’s manual. -
Page 3: Ignition
Gasoline and Oil This product requires oil and fuel. Attempting to start the engine without oil will ruin the engine and void the warranty. Work in well ventilated areas. Keep cigarettes, flames or sparks away from the work area or where gasoline is stored. - Page 4 Work Area • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Generators create sparks which may ignite the dust or fumes. •...
- Page 5 Personal Safety • Stay alert. Watch what you are doing, and use common sense when operating a generator. Do not use generator while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating generators may result in serious personal injury. •...
-
Page 6: Frame
Installation • Ensure installation meets all applicable safety, and local and national electrical codes. Have installation performed by a qualified, licensed electrician and building contractor. • All electrical work, including the earth-ground connection, should be completed by a licensed electrician. •... -
Page 7: Switch
Noise • Prolonged exposure to noise levels above 68 dB is hazardous to hearing. Always wear ANSI approved ear protection when operating or working around the generator when it is running. Chemicals • Avoid contact with hot fuel, oil, exhaust fumes, and hot solid surfaces. •... -
Page 8: Fuel Tank
Starting 1. Turn the engine switch to the ON position. The engine switch enables and disables the ignition system. OFF: To stop the engine ON: To run the engine 2. The fuel valve is located under the fuel tank. When the valve lever is in the ON position, fuel is allowed to flow from the fuel tank to the carburetor. -
Page 9: Spark Plug Service
5. After the engine and generator have completely cooled, store generator in a safe, clean, dry location (if not already installed). The machine does not have a 12V DC output! Spark Plug Service • In order to service the spark plug, you will need a spark plug wrench (commercially available). -
Page 10: Tank.
• Before each use, make sure the engine’s oil and gas levels are adequate. If necessary, fill the crankcase until the oil level is even with the oil fill hole and/or fill the fuel tank. • Before each use, remove all debris with a soft brush, rag, or vacuum. •... -
Page 11: Spring
Specifications AC electrical Current Output 120V AC @ 19A Continuous/rated Wattage 2,300 W Peak Wattage 2,800 W Outlet 2 @ 120V AC, 3 spring grounded DC electrical Gasoline engine Horsepower 6.0 HP Type 4-cycle OHV air-cooled recoil start Displacement 171cc Oil capacity 0.6 quart (0.56 liter) EPA approved... -
Page 12: Table Of Contents
Parts List Description Description Description hex bolt with flange M6x10 Crankshaft assembly Plate Start cover Locating ring Hex nut M6 Nut M14 Cam shaft Element fitting plate Washer 14mm Valve lifter Air filter Start shaft sleeve Hex bolt with flange M7x35 Air filter cover Ventilating cover Connecting rod cap... - Page 13 Parts Diagram...
- Page 14 Compliance UNITED STATES ENVIRONMENTAL PROTECTION AGENCY, WASHINGTON, DC 20460 2006 Model Year Certificate of Conformity • Manufacturer: SuZhou Tiger Power Machine Co. Ltd. • Certificate Number: STP-NRSI-06-03 • Effective Date: Aug 02 2005 • Date Issued: Aug 02 2005 Merrylin Zaw-Mon, Director, Compliance and Innovation Strategies Division, Office of Transportation and Air Quality. Pursuant to Section 213 of Clean Air Act (42 U.S.C.
Need help?
Do you have a question about the 8142564 and is the answer not in the manual?
Questions and answers